Table of Contents
Advertisement
Enabling USB Debugging
USB debugging must be enabled before being able to use the
Development feature.
1. From the Home screen, press
Settings
Developer options.
2. In a single motion touch and slide the Developer options
slider to the right to turn it on.
3. Tap the USB debugging field to verify the feature is
active before connecting your USB cable.
4. Using an optional PC data cable, connect the
multifunction jack on your device to a PC.
Wi-Fi
About Wi-Fi
and then tap
Note: After you complete a connection to an active Wi-Fi
Note: For additional information on WPS Connections, refer to
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be
Open (unsecured) as within most Hot Spots, or Secured
(requiring knowledge of the Router name and password).
network, the Wi-Fi Calling feature will automatically be
enabled.
"WPS Push Button" on page 275 and "WPS PIN Entry"
on page 275.
Connections
265
Advertisement
Table of Contents
