Fujitsu PenCentra 200 User Manual page 66

• If you are communicating through a modem connected to the desktop computer,
the modem must be turned on. Also, the Auto Connect should be set to At all
times in Windows CE Services. Otherwise, a Mobile Devices window must be
open.
• If you are communicating with the desktop computer through a dial-up or
network connection, you must be logged on to the network on the desktop
computer. Before you leave, select Enable a network connection in the Windows
CE Services Properties dialog box.
If your computer must be turned off while you are away from your office, you
cannot synchronize remotely. However, you can dial in directly to your network to
receive your e-mail. For more information, see "Connecting to Your Network."
If the above conditions are met, you can synchronize with your desktop computer
while away from the office in one of three ways:
• Create a dial-up connection using a RAS account. Before you can create this
dial-up connection, your network administrator will need to set up a RAS account
for you. Once connected to the network, your PenCentra 200 will find your
desktop computer and initiate synchronization. If this is the method you want to
use, see "To create a dial-up connection to a network." Once the connection has
been created and you are connected, select Start, Programs, Communications,
and then ActiveSync on your PenCentra 200. In the ActiveSync dialog box, select
the dial-up connection you created as the method to connect and the name of the
computer you want to connect to.
• Use an Ethernet card to connect to the network. Once connected to the network,
your PenCentra 200 will find your desktop computer and initiate
synchronization. If this is the method you want to use, see "To create a network
(Ethernet) connection." Once the connection has been created and you are
connected, select Start, Programs, Communications, and then ActiveSync on
your PenCentra 200. In the ActiveSync dialog box, select Network Connection as
the method to connect and the name of the computer you want to connect to.
• Create a dial-up connection to a modem connected directly to your computer. The
modem must be set up to answer incoming calls. If this is the method you want to
use, see "To create a dial-up connection to a modem attached to your desktop
computer." Once the connection has been created and you are connected, select
Start, Programs, Communications, and then ActiveSync on your PenCentra 200.
In the ActiveSync dialog box, select the dial-up connection you created as the
method to connect and the name of the computer from the Connect to list.
54 Using Microsoft CE Applications