Displaying A List Of Inlink-Compatible (Hdmi-Cec) Devices; Restoring Settings To Default; Using A Usb Flash Drive; Switching To Usb Mode - Dynex DX-60D260A13 User Manual

36
DX-60D260A13
Displaying a list of INlink-compatible
(HDMI-CEC) devices
You can display a list of HDMI CEC devices that are
connected to your TV.
To display a list of INlink-compatible devices:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Settings, then press . The
Settings menu opens.
3
Press or to highlight INlink, then press ENTER.
The Settings-INlink menu opens.
4
Press or to highlight INlink Device Lists, then
press ENTER. A list of the HDMI CEC-compatible
devices you have connected to your TV appears.
5
Press MENU to return to the previous menu, or press
EXIT to close the menu.
Note
• HDMI cables must be used to connect HDMI
CEC-compatible devices to your TV.
• The connected device's HDMI CEC feature must
be turned on.
• If you connect an HDMI device that is not HDMI
CEC-compatible, the INlink Control option
does not work.

Restoring settings to default

Caution
When you restore default settings, all the settings
you have customized are reset.
To restore settings to default:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Settings, then press . The
Settings menu opens.
3
Press or to highlight Reset to Default, then
press ENTER. A confirmation box opens.
4
Press or to select Yes (to reset all settings to
factory default), or No (to not reset).
5
Press EXIT to close the menu.

Using a USB flash drive

You can connect a USB flash drive to your TV to view
compatible JPEG pictures.
Notes
• The JPEG picture viewer only supports JPEG
format images (with ".jpg" file extensions).
• Not all JPEG files are compatible with your TV.

Switching to USB mode

To switch to USB mode:
1
Make sure that you have connected the USB flash
drive to the USB port on the side of your TV.
2
Press INPUT. The INPUT SOURCE list opens.
3
Press or to highlight USB, then press ENTER.
Note
To exit USB mode, press INPUT to open the INPUT
SOURCE list, then select another input source.
Restoring settings to default