Fujitsu Stylistic 1200 User Manual page 25

Note: When installed in the pen tablet, the battery pack provides power to some system
components—even when the system is in the Fully Off state. When the battery
pack is removed, power is supplied to these components by a "bridge" battery built
into the pen tablet. To prevent draining the bridge battery, always store the pen
tablet with a charged battery pack installed.
To install the battery pack:
1. Slide the battery pack into the pen tablet until it is firmly seated.
Keep your fingers clear of the area between the battery pack
and the pen tablet when you install the battery pack.
2. Slide the battery latch into the locked position.
Once the battery pack is installed, you can resume system operation or start your
system and use the system as you normally would.
Removing and Installing the Battery Pack
Warning
Removing and Installing the Battery Pack
Battery Pack
k e d
l o c
U n
o n
s i t i
P o
Battery Latch
k e d
L o c
o n
s i t i
P o
2-11