Configuring Cluster Event Notifications - Dell PowerVault DL4000 User Manual

To modify cluster settings:
1. Do one of the following:
– In the Core Console, click the Machines tab, and then select the cluster you wish to modify.
– Or, in the left navigation area, select the cluster you wish to modify.
2. Click the Configuration tab.
The Settings page is displayed.
3. Click Edit to modify the settings on this page for the cluster as described below.
Text Box
Display Name
Host Name
Repository
Encryption Key

Configuring Cluster Event Notifications

You can configure how system events are reported for your cluster by creating notification groups. These events could
be system alerts or errors.
To configure cluster event notifications:
1. Do one of the following:
– In the Core Console, click the Machines tab, and then select the cluster you wish to modify.
– Or, in the left navigation area, select the cluster you wish to modify.
2. Click the Configuration tab, and then click Events.
3. Select one of the options described in the following table.
Text Box
Use Core alert
settings
Use Custom alert
settings
4. If you select Custom alert settings, click Add Group to add a new notification group for sending a list of system
events.
Description
Enter a display name for the cluster.
The name for this cluster is displayed in the AppAssure 5 Core Console. By default, this is
the host name for the cluster. You can change this to something more descriptive, if
needed.
This setting represents the host name for the cluster. It is listed here for informational
purposes only and cannot be modified.
Enter the Core repository associated with the cluster.
NOTE: If snapshots have already been taken for this cluster, this setting is listed here
for informational purposes only and cannot be modified.
Edit and select an encryption key if necessary.
This specifies whether encryption is to be applied to the data for every volume on this
cluster to be stored in the repository.
Description
This adopts the settings used by the associated core:
a. Click Apply.
b. Continue to Step 7.
This lets you configure custom settings, continue to Step 4.
129