Fujitsu Siemens Computers D1522 Technical Manual
Fujitsu Siemens Computers D1522 Technical Manual

Fujitsu Siemens Computers D1522 Technical Manual

Fujitsu computer hardware - mainboard user manual

Advertisement

answers
2
Technisches Handbuch / Technical Manual
Mainboard D1522 / D1521
Deutsch / English / Français

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D1522 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fujitsu Siemens Computers D1522

  • Page 1 Technisches Handbuch / Technical Manual Mainboard D1522 / D1521 Deutsch / English / Français...
  • Page 2 Are there ..any technical problems or other questions you need clarified? Please contact: • your sales partner • your sales outlet The latest information and updates (e.g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards...
  • Page 4 Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1522-Z120-1-6319 Bestell-Nr./Order No.: Printed in the Federal Republic of Germany AG 0103...
  • Page 5 Mainboard D1522 / D1521 Technisches Handbuch Technical Manual Ausgabe Januar 2003 January 2003 edition Deutsch English Français...
  • Page 7 Dieses Handbuch wurde erstellt von cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright  Fujitsu Siemens Computers GmbH 2003 Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
  • Page 8 Übersicht/Overview Mainboard D1522 / D1521 Interne Anschlüsse und Steckplätze / Internal connectors and slots Pentium 4 PCI 1 PCI 2 PCI 3 Externe Anschlüsse / External connectors A26361-D1522-Z120-1-6319 10 = 11 = 12 = 13 = 14 = 15 =...
  • Page 10: Table Of Contents

    Contents Mainboard D1522 / D1521...1 Notational conventions ...1 Important notes...2 Information about boards ...2 List of features...3 Special technical features – special features ...4 Brief instructions on installing mainboard ...6 Prior to installation ...6 Interfaces and connectors ...8 External ports ...8 Internal ports and connectors ...9...
  • Page 12: Mainboard D1522 / D1521

    Mainboard D1522 / D1521 Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard. Further information Information on the BIOS Setup and additional descriptions of the drivers are contained: •...
  • Page 13: Important Notes

    Mainboard D1522 / D1521 Important notes With the mainboard installed you must open the system to access the mainboard. How to dismantle and reassemble the system is described in the operating manual accompanying the system. Connecting cables for peripherals must be adequately shielded to avoid interference.
  • Page 14: List Of Features

    LAN / with Alert-on-LAN HI-SPEED USB 2.0 SmartCard Reader Support (USB / serial) Temperature monitoring System Monitoring Fujitsu Siemens Computers Keyboard Power Button Support Internal ports DIMM Sockets (DDR SDRAM, PC2100/1600) AGP Slot (2/4x, 32 bit, 66 MHz, 1.5 V) PCI slot (32 bit, 33 MHz, 5 V and 3.3 V)
  • Page 15: Special Technical Features - Special Features

    Thermal Management and System Monitoring A microcontroller developed by Fujitsu Siemens Computers reliably protects your PC against damage caused by overheating. Overheating can lead to the data loss or processor damage.
  • Page 16 If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions are provided in the chapter "BIOS Recovery - Recovering System BIOS".
  • Page 17: Brief Instructions On Installing Mainboard

    Equip the mainboard with the processor, heat sink and memory modules before installation if possible. Further information can be found in "Installing and removing processors" chapter. 6 - English Ê Open the casing as described in the operating manual. A26361-D1522-Z120-3-6319...
  • Page 18: Driver Installation

    Ê Install the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please refer to chapter "Drivers" for a description of installing drivers. A26361-D1522-Z120-3-6319 Brief instructions on installing mainboard Ê Should no suitable connection field be provided in the case, then you must install the connection field (1) provided.
  • Page 19: Interfaces And Connectors

    Audio input (Line in), light blue LAN connector This mainboard is equipped with the 82562ET (D1521) or the 82562EM (D1522) LAN controller. Both LAN controller support transfer speeds of 10 Mbit/s and 100 Mbit/s. The LAN controller are equipped with a 3 KB transmission and receiving buffer (FIFO) and support WOL function through Magic Packet.
  • Page 20: Internal Ports And Connectors

    An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode. Ê Connect the end of the cable marked with blue to the mainboard. A26361-D1522-Z120-3-6319 Refresh rate (Hz) Interfaces and connectors Colour...
  • Page 21: Pin Assignment Of Internal Ports

    Power On Sleep LED 1) 3) HD-LED Reset SCSI LED Input 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Note 0,5 W at 8 Ohm A26361-D1522-Z120-3-6319 Sleep LED Speaker...
  • Page 22 Power supply ATX +3.3 V (P3V3P) +3.3 V (P3V3P) Powergood (high asserted) +5 V Auxiliary (VCC Aux) +12 V (P12VP) Power control (system monitoring) A26361-D1522-Z120-3-6319 Note Power On LED (Anode) Power On LED (Anode) Power On LED (Cathode) Signal +5 V (VCC)
  • Page 23 Fan voltage (+12 V, max. 1 A) Fan sense Signal or fix Fan voltage (+12 V, max. 1 A) Fan sense Signal SMB CLK SMB DATA Power Icon Signal Reserved for Future Use LAN Link Icon BMC Alert Icon Sleep Icon P3V3P DUAL A26361-D1522-Z120-3-6319...
  • Page 24 (internal or external via special wire) Data negative C Data positive C Intrusion for case open detect for optional push-button (opener) Audio S/PDIF (2-pin) A26361-D1522-Z120-3-6319 Signal VCC C Signal Case open (low asserted) Intrusion switch present (low asserted) Signal SPDIF out...
  • Page 25: Audio Front Panel

    14 - English Signal SPDIF out Signal Micro input Micro bias Signal Left CD audio input CD GND CD GND Right CD audio input Signal Signal Analog GND Analog VCC Right line return Left line return Signal +12 V +12 V A26361-D1522-Z120-3-6319...
  • Page 26: Settings With Switches And Jumpers

    Diskette" restores the System BIOS on the mainboard. Normal operation (default setting). Reserved - switch 3 and switch 4 Switch 3 and 4 are reserved. A26361-D1522-Z120-3-6319 Settings with switches and jumpers Switch 1 = Skipping system and BIOS Setup password...
  • Page 27: Add-On Modules / Upgrading

    (A) with regard to the position (4). The angled corner of the processor can also be at a different location than shown in the illustration. Ê Push the lever back down until it clicks into place (5). 16 - English A26361-D1522-Z120-3-6319...
  • Page 28: Mounting Heat Sink

    If no counter-plate is mounted, you can use both "Intel Boxed" heat sinks and standard heat sinks. If you use the "Intel Boxed" heat sink, the mainboard will bend due to the high pressure of the retaining clips. This behaviour is specified by Intel. A26361-D1522-Z120-3-6319 Add-on modules / Upgrading Ê...
  • Page 29: Upgrading Main Memory

    32, 64, 128, 256, 512 or 1024 Mbyte for one socket A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.de/mainboards. At least one memory module must be installed. Memory modules with different memory capacities can be combined.
  • Page 30: Upgrading Agp Screen Controllers

    The installation of such 3.3 V AGP screen controllers can cause serious damage to the mainboard and the AGP screen controller. Adding PCI cards Technical data: 32 bit / 33 MHz PCI slots 5 V and 3.3 V supply voltage 3.3 V auxiliary voltage A26361-D1522-Z120-3-6319 Add-on modules / Upgrading English - 19...
  • Page 31: Pci Bus Interrupts - Selecting Correct Pci Slot

    PCI slot with IRQ sharing, check whether the expansion card properly supports IRQ sharing with the other devices on this PCI IRQ Line. The drivers of all cards and components on this PCI IRQ Line must also support IRQ sharing. 20 - English AC97 Audio Modem LAN PCI slot A26361-D1522-Z120-3-6319...
  • Page 32: Replacing Lithium Battery

    Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1). Ê Remove the battery (2). Ê Insert a new lithium battery of the same type into the socket (3). A26361-D1522-Z120-3-6319 Add-on modules / Upgrading English - 21...
  • Page 33: Bios Update

    Add-on modules / Upgrading BIOS update When should a BIOS update be carried out? Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new operating systems, new software or new hardware. In addition, new BIOS functions can also be integrated.
  • Page 34: Bios Recovery - Recovering System Bios

    To guarantee the best possible performance and error-free operation, Intel recommends updating the microcode regularly. Intel refers to the use of the processor without regular microcode updates as operation outside the specifications. A26361-D1522-Z120-3-6319 Add-on modules / Upgrading English - 23...
  • Page 35: Drivers

    Add-on modules / Upgrading Safety for processor on Fujitsu Siemens Computers mainboards If the processor uses an old or incorrect microcode, error-free operation cannot be ensured. Fujitsu Siemens Computers has therefore implemented a function on its mainboards that interrupts the booting process if no suitable microcode is available for the installed processor.
  • Page 36: Annex

    Mainboard current requirement You require a Pentium4 power supply nit as per the ATX12V specification for this mainboard. If you do not have a PC from Fujitsu Siemens Computers, make sure that the power supply unit provides the required amperages.
  • Page 37: Apm And Acpi System Status, Energy-Saving Modes

    1 A. 26 - English Power Sleep Status Standby Soft Off Power Wake-up consumption time Normal Almost like Almost normal immediate RAM, ca. 5s wake-up components Wake-up ca. 20s components Nearly zero Full boot Zero Full boot A26361-D1522-Z120-3-6319 time time...
  • Page 38: Mainboard Revision And Bios Version

    The revision status of the mainboard exactly identifies which mainboard you have. It is indicated on a sticker on the edge of the mainboard: Example of revision status of the mainboard D1522-B10 GS 1 BIOS version The BIOS version can be displayed in the BIOS Setup.
  • Page 39: Error Messages

    Available CPUs do not support the same bus frequency – System halted! Memory type mixing detected Non Fujitsu Siemens Memory Module detected – Warranty void There are more than 32 RDRAM devices in the system Check whether the system configuration has changed. If necessary, correct the settings.
  • Page 40 Keyboard error Check that the keyboard is connected properly. Keyboard error nn nn Stuck Key Release the key on the keyboard (nn is the hexadecimal code for the key). A26361-D1522-Z120-3-6319 Error messages English - 29...
  • Page 41 = Group number x = Number of SEs found on the communication bus y = Number of SEs entered in Number of connected SE k1, k2 ... = Device ID of the storage extensions found 30 - English A26361-D1522-Z120-3-6319...
  • Page 42: Dos Error Messages

    Critical error logged to server management processor - system halted If the NMI button of the control panel is pressed, then the following error text is output on the screen: Frontpanel NMI activated - system halted A26361-D1522-Z120-3-6319 Error messages English - 31...
  • Page 43: Smartcard Reader - Error Messages

    You have exceeded the maximum number of failed attempts to enter the PIN. The Sicrypt SmartCard is blocked. Enter the administrator PIN to re-activate the Sicrypt SmartCard. You must then enter a new User PIN to restart the system. 32 - English A26361-D1522-Z120-3-6319...
  • Page 44: Glossary

    Inter Integrated Circuit IAPC Instantly Available Power Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics IPSEC Internet Protocol Security A26361-D1522-Z120-3-6319 Error messages Industrial Standard Architecture Local Area Network LAN Desk Service Agent Memory Controller Hub MultiMedia eXtension P64H...

This manual is also suitable for:

D1521

Table of Contents

Save PDF