Appendix A. SetIP Address Utility
This program is for the network IP setting using the MAC address which is the
hardware serial number of the network printer card or interface. Especially, it is
for the network administrator to set several network IPs at the same time.
NOTE:
You can only use Set IP Address Utility when your printer is connected to a
network.
Connect the straight network cable to your printer/MFP.
1
Print the Network Configuration page of the printer/MFP to see the
2
current network configuration and MAC address. Refer to a user's guide of
your printer/MFP to print the network configuration page.
From the Start menu, select Programs
3
printer driver name
Or
From the Start menu, select Programs
driver name
Click in the SetIP window to open the TCP/IP configuration window.
4
Enter the network card's MAC address, IP address, subnet mask, default
5
gateway, and then click Apply.
NOTE:
when you enter the MAC address, enter it without colon(:).
Click OK.
6
Click Exit to close the SetIP program.
7
Set IP Address Utility.
Set IP Address Utility.
Appendix A. SetIP Address Utility
Dell
Dell Printers
Dell Printers
your printer
your
22