Dell 1130 Laser Mono Printer Troubleshooting Manual page 41

CardStock
Labels
Transparency
Envelope
Preprinted
Cotton
Recycled ●
Archive ●
( ●: supported, Blank: Not supported)
The media types are shown in the Printing Preferences. This paper type option allows you to set the type of paper to be
loaded in the tray. This setting appears in the list, so that you can select it. This will let you get the best quality printout. If
not, the desired print quality may not be achieved.
Plain: 60 to 120 g/m
Thick: 90 (24 lb) thick paper.
2
Thin: 60 to 70 g/m
Bond: 105 to 120 g/m
Color: 75 to 90 g/m
CardStock: 105 to 163 g/m
Labels: 120 to 150 g/m
Transparency: 138 to 146 g/m
Envelope: 75 to 90 g/m
Preprinted: 75 to 90 g/m
Cotton: 75 to 90 g/m
Recycled: 75 to 90 g/m
When you use recycled paper, printouts might be wrinkled.
Archive: 70 to 90 g/m
this option.
Envelope
Successful printing on envelopes depends upon the quality of the envelopes.
To print an envelope, the stamp area is on the left side and the end of the envelope with the stamp area enters the
printer first and center of the manual tray.
If envelopes are printed out with wrinkles, crease or black bold lines, open the rear cover and pull down the pressure
lever and try printing again. Keep the rear cover opened during printing.
●
●
●
●
●
●
●
●
2
(16 to 32 lb) Normal plain paper.
(16 to 19 lb) thin paper.
2
(28 to 32 lb) bond.
2
(20 to 24 lb) color-backgrounded paper.
2
(24 to 43 lb) cardstock.
2
(32 to 40 lb) labels.
2
(37 to 39 lb) transparency paper.
2
(20 to 24 lb) envelope.
2
(20 to 24 lb) preprinted/letterhead paper.
2
(20 to 24 lb) cotton paper.
2
(20 to 24 lb) recycled paper.
2
(19 to 24 lb) If you need to keep the print-out for a long period time, such as archives, select
Pressure lever
1.