Onkyo TX-NR828 Owner's Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. TX-NR828
  6. Owner's manual

Onkyo TX-NR828 Owner's Manual

Owner's manual english
Hide thumbs Also See for TX-NR828:
Table of Contents

Advertisement

Quick Links

See also: Quick Manual
Enlarged version
AV RECEIVER
TX-NR828
Instruction Manual
Contents
Table of Contents ...........................................6
Connections .................................................14
Turning On & Basic Operations..................24
Playback........................................................32
Advanced Operations ..................................56
Controlling Other Components...................82
Appendix .......................................................91
Internet Radio Guide
Remote Control Codes
E
n

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TX-NR828 and is the answer not in the manual?

Questions and answers

Related Manuals for Onkyo TX-NR828

Summary of Contents for Onkyo TX-NR828

  • Page 1: Table Of Contents

    Contents Safety Information and Introduction ....2 AV RECEIVER TX-NR828 Table of Contents ...........6 Connections ..........14 Turning On & Basic Operations....24 Instruction Manual Playback............32 Advanced Operations ........56 Controlling Other Components....82 Appendix ............91 Internet Radio Guide Remote Control Codes...

  • Page 2: Safety Information And Introduction

    Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized B. If liquid has been spilled, or objects have fallen or grounding-type plug. A polarized plug has two into the apparatus, WARNING: blades with one wider than the other. A grounding C.

  • Page 3: Precautions

    If water or any other liquid gets –Increase the separation between the equipment cloths, thinners, alcohol, or other chemical inside this unit, have it checked by your Onkyo and receiver. solvents, because they may damage the finish or dealer.
  • Page 4 –Hereby, Onkyo Corporation, declares that this dispositif rayonnant et le corps (à l’exception des proceed as follows: TX-NR828 is in compliance with the essential extrémités : mains, poignets, pieds et chevilles). requirements and other relevant provisions of The wire which is coloured blue must be connected to For Canadian Models Directive 1999/5/EC.

  • Page 5: Supplied Accessories

    Smernice 1999/5/ES. enable you to obtain optimum performance and esenciales y otras exigencias relevantes de la –Onkyo Corporation izjavlja, da je ta TX-NR828 v listening enjoyment from your new AV Receiver. Directiva 1999/5/EC. skladu z bistvenimi zahtevami in drugimi Please retain this manual for future reference.

  • Page 6: Table Of Contents

    Changing the Icon Layout Remapping Colored Buttons ........83 Display ..............10 on the Network Service Screen......37 Remote Control Codes for Onkyo Components Rear Panel ..............11 Playing Music Files on a Server (DLNA) ....37 Connected via RI ........... 83 Remote Controller............12...

  • Page 7: Features

    • 130 Watts/Channel @ 8 ohms (FTC) * Compatible with HDMI IN 1 to HDMI IN 4 only • 180 Watts/Channel @ 6 ohms (IEC) • Onkyo for System Control • 215 Watts/Channel @ 6 ohms (JEITA) • 5 Digital Inputs (2 Optical/3 Coaxial) •...

  • Page 8: Front & Rear Panels

    Safety Information and Introduction Front & Rear Panels Front Panel (North American models) (European and Australian models) En-8...
  • Page 9 Safety Information and Introduction For detailed information, see the pages in PHONES jack (23) parentheses. BLUETOOTH button (34, 78) ON/STANDBY button (24) ZONE 2 and ZONE 3 buttons (80) Remote control sensor (13) TONE and Tone Level buttons (57) BLUETOOTH indicator (34, 78) MONITOR OUT button (61) Wi-Fi indicator (30) DISPLAY button (52)

  • Page 10: Display

    Safety Information and Introduction Display For detailed information, see the pages in Input indicators (21) parentheses. HDMI indicator (75) Speaker/channel indicators DIGITAL indicator Z2 (Zone 2) indicator (80) ANALOG indicator Z3 (Zone 3) indicator (80) Bi AMP indicator Listening mode and format indicators (44, 72) Audyssey indicator (27, 68) M.Opt (Music Optimizer) indicator (58) Dynamic EQ indicator (69)

  • Page 11: Rear Panel

    Safety Information and Introduction FM ANTENNA jack and AM ANTENNA terminal Rear Panel HDMI IN and HDMI output (HDMI OUT MAIN and HDMI OUT SUB) jacks RS232 port Terminal for control. IR IN jack ZONE 2 12V TRIGGER OUT jack SPEAKERS terminals (FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, FRONT HIGH/Bi-AMP...

  • Page 12: Remote Controller

    MODE other than Receiver mode is selected. HOME button (55) SLEEP button (52) • You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See “Entering Remote Control Codes” for more details (➔...
  • Page 13 Safety Information and Introduction ■ Aiming the remote controller To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below. Remote control sensor AV receiver Approx. 16 ft. (5 m) ■ Installing the batteries Batteries (AA/R6) Note •...

  • Page 14: Connections

    Connections Speaker Configuration Using Powered Subwoofers The following table indicates the channels you should use depending on the number of speakers that you have. Connections No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and Corner solid bass.
  • Page 15 Connections Attaching the Speaker Cable Labels The speaker terminals are color-coded for identification purpose. Speaker Color Front left, Front high left, Front wide White left, Zone 2 left Front right, Front high right, Front wide right, Zone 2 right Center Green Surround left Blue...
  • Page 16 Connections Connecting the Speaker Cables/Powered Subwoofers Before connecting the power cord, connect all of your speakers and AV components. A setup wizard Please connect for 5.1-channel surround. is launched upon first-time use to let you perform If you’re using only one the settings (➔...
  • Page 17 Connections • Make sure the metal core of the wire does not have Connecting a Power Amplifier contact with the AV receiver’s rear panel. Doing so You can use the AV receiver as a preamp. Connect may damage the AV receiver. all speaker outputs to the power amplifier.

  • Page 18: Connecting The Tv/Av Components

    Connections Use this jack to connect to the game consoles, Connecting the TV/AV components etc. Use this port to connect to a LAN port on a router Before connecting the power cord, connect all of your speakers and AV components. To display the setup so the AV receiver can be connected to your menu on the TV screen, connecting the TV to HDMI OUT MAIN is required.

  • Page 19: About Rihd-Compatible Components

    Players/Recorders The default of the assignment for the input selector buttons and jacks are as shown below. These settings can • Onkyo and Integra -compatible players be changed. (The assignment for the composite video jacks, analog audio jacks, and HDMI Front jack cannot be •...

  • Page 20: Operations That Can Be Performed With Rihd Connection

    Connections • On the TV, when you select anything other than the HDMI Operations that can be performed with Confirm the settings jack to which the AV receiver is connected, the input on the RIHD connection AV receiver will be switched to “TV/CD”. 1.
  • Page 21 Connections This is possible when “Audio Return Channel” is set to Signal Selection Example Video Signal Flow Chart “Auto” (➔ page 76), the TV/CD input selector is Blu-ray Disc/DVD player, etc. Blu-ray Disc/DVD player, etc. selected, and your TV is ARC capable. Composite Component HDMI...

  • Page 22: Connecting The Antennas

    Connections ■ Optical digital audio Connecting the Antennas Optical digital connections allow you to enjoy digital sound such as PCM , Dolby Digital or DTS. The This section explains how to connect the supplied indoor FM antenna and AM loop antenna. audio quality is the same as coaxial.

  • Page 23: Connecting Onkyo Ri Components

    • Some components may not support all functions. Refer (➔ page 83). to the manuals supplied with your Onkyo components. • While Zone 2/3 is on, the System On/Auto Power On and Direct Change functions do not work. En-23...

  • Page 24: Turning On & Basic Operations

    Turning On & Basic Operations the same circuit. If this is a problem, plug the AV receiver Turning Off into a different branch circuit. • Do not use a power cord other than the one supplied with Press ON/STANDBY on the front panel. the AV receiver.

  • Page 25: Firmware Update Notification

    Turning On & Basic Operations Initial Setup Firmware Update Notification Use / on the AV receiver or remote controller to select one of the following When a new version of the firmware is available, the This section explains the settings that we recommend options, and then press ENTER.

  • Page 26: Source Connection

    Turning On & Basic Operations Follow the instructions on screen to perform Source Connection Remote Mode Setup the network checking. This step checks the connection of source With this step, you can enter remote control codes for The checking is complete when the message components.

  • Page 27: Using The Automatic Speaker Setup

    Turning On & Basic Operations Measurement procedure Using the Automatic Speaker Setup Note • Make the room as quiet as possible. Background noise and To create a listening environment in your home With the supplied calibrated microphone, Radio Frequency Interference (RFI) can disrupt the room theater that all listeners will enjoy, Audyssey MultEQ Audyssey MultEQ ®...
  • Page 28 Turning On & Basic Operations Turn on the AV receiver and the connected TV. Adjust the subwoofer volume level to 75 dB, Use / to select an option, and then press and then press ENTER. On the TV, select the input to which the AV ENTER.
  • Page 29 If this message appears after 2 or 3 so use an appropriate volume level. If the subwoofer attempts, contact your Onkyo dealer. has a low-pass filter switch, set it to Off or Direct. • Speaker Detect Error Refer to your subwoofer’s instruction manual for...

  • Page 30: Performing Wireless Lan Setup

    Turning On & Basic Operations ■ PIN code method Performing Wireless LAN Setup Use / to select “Network Connection”, and to select “Wireless”, and then press 1. Use / to select “PIN Code” and then press ENTER (➔ page 77). ENTER.
  • Page 31 Turning On & Basic Operations Manual wireless LAN setup Select “OK” and press ENTER. Use / to select the Access Point you wish to Connection to your Access Point starts and Wi-Fi connect to, and then press ENTER. indicator flashes. After the connection to your Depending on your encryption settings, the Press RECEIVER followed by HOME.

  • Page 32: Playback

    (➔ page Press the input selector button to which the AV components to be played is connected. • “Using the Onkyo Dock” (➔ page Press the TV/CD button to play the audio of the TV. Switching the input on the TV is also required.

  • Page 33: Controlling Contents Of Usb Or Network Devices

    Playback TOP MENU REPEAT Controlling Contents of USB or This button displays the top menu for each media or Press this button repeatedly to cycle through the repeat Network Devices service. modes. (➔ page / and ENTER These buttons navigate through the menus. •...

  • Page 34: Understanding Icons On The Display

    Playback Pairing the AV receiver with a Bluetooth- Understanding Icons on the Display Playing an Audio from Bluetooth- enabled device enabled Device This section describes icons that appear on the AV Pairing is an operation where Bluetooth-enabled receiver’s display during media playback. About the Bluetooth Wireless Technology devices register with each other beforehand.

  • Page 35: Playing A Usb Device

    • The model name appeared on the display of your The network service screen appears, and the Bluetooth-enabled device is “Onkyo TX-NR828”. This section explains how to play music files from a NET indicator lights. If it flashes, the AV receiver USB device (e.g., USB flash drives and MP3 players).
  • Page 36 Playback Setting an TuneIn account • Adding TuneIn radio stations or programs to My Use / to select a station or a program, and Presets then press ENTER. To create a user account for TuneIn, open a browser Select “TuneIn”, and press ENTER button to display Playback starts.

  • Page 37: Registering Other Internet Radio

    Playback Click “Save” to save the Internet radio station. Registering Other Internet Radio Changing the Icon Layout on the The Internet radio station is then added to “My Network Service Screen You need to connect the AV receiver to your home Favorites”.
  • Page 38 Playback Windows Media Player Setup On the “Stream” menu, select “Turn on media Use / / / to select “DLNA”, and press streaming”. ENTER. ■ Windows Media Player 11 Setup A dialog box appears. Use / to select a server, and then press This section explains how to configure Windows ENTER.

  • Page 39: Playing Music Files On A Shared Folder

    Playback ■ Creating a shared folder Playing music files on a shared folder Playing Music Files on a Shared Folder In order to enjoy Home Media, you must first create a Right-click the folder that you want to share. This section explains how to play music files on a shared folder on your computer.

  • Page 40: Remote Playback

    Playback Click “OK” to close the dialog box. Adjusting the Volume. Remote Playback This completes the Windows Media Player 12 You can adjust the volume by adjusting the You need to connect the AV receiver to your home configuration. volume bar in the “Remote playback” window. network (➔...

  • Page 41: Listening To Am/Fm Radio

    Playback ■ Tuning into stations by frequency Listening to AM/FM Radio Press TUNING / . You can tune into AM and FM stations directly by Searching stops when a station is found. entering the appropriate frequency. This section describes the procedure of using the buttons on the front panel, unless otherwise specified.
  • Page 42 Playback ■ ■ What is RDS? Displaying Radio Text (RT) Press MEMORY again to store the station or RDS stands for Radio Data System and is a method channel. Press RT/PTY/TP once. of transmitting data in FM radio signals. It was The station or channel is stored and the preset The RT information scrolls across the AV developed by the European Broadcasting Union...

  • Page 43: Playing Audio And Video From Separate Sources

    Playback ■ Listening to Traffic News (TP) RDS program types (PTY) Playing Audio and Video from Separate Type Display Sources You can search for stations that broadcast traffic None None news. You can listen to the audio of one input source while News reports News watching the video of another.

  • Page 44: Using The Listening Modes

    Playback Using the Listening Modes Note • The Dolby Digital and DTS listening modes can only be About Listening Modes selected if your Blu-ray Disc/DVD player is connected to the AV receiver with a digital audio connection (coaxial, optical, The AV receiver’s listening modes can transform your or HDMI).
  • Page 45 Playback ■ Input Source Onkyo-Original DSP Listening Modes The following audio formats are supported by the listening modes. Listening Mode Description Input Speaker Source Layout This is mono (monophonic) sound. Orchestra Suitable for classical or operatic music, This is stereo (stereophonic) sound. Two independent audio signal channels this mode emphasizes the surround are reproduced through two speakers.
  • Page 46 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout T-D (Theater- With this mode you can enjoy a virtual In this mode, audio from the input source Dimensional) surround sound even with only two or is output without surround-sound D S D three speakers.
  • Page 47 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout DTS-ES Matrix This mode is for use with DTS-ES Matrix Dolby Pro Logic IIz Dolby Pro Logic IIz Height is designed soundtracks, which use a matrix- Height to more effectively use existing program a t r i x...
  • Page 48 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout Audyssey DSX • Audyssey DSX Founded by George Lucas, THX develops stringent standards that Audyssey DSX ® is a scalable system A u d s s e y D S X ensure movies are reproduced in movie that adds new speakers to improve...
  • Page 49 Playback Listening Mode Description Input Speaker Listening Mode Description Input Speaker Source Layout Source Layout • Dolby Pro Logic II/IIx Movie + THX • THX Select2 Cinema N e o T H X C i n e m a Cinema THX Select2 Cinema mode plays 5.1 •...
  • Page 50 Playback Listening Mode Description Input Speaker Source Layout • THX Surround EX T H X S u r r This mode expands 5.1-channel sources for 6.1/7.1- channel playback. It’s especially suited to Dolby Digital EX sources. THX Surround EX, also known as Dolby Digital Surround EX, is a joint development between Dolby Laboratories and THX Ltd.
  • Page 51 Playback Dialogue Normalization spatial errors that occur. On this product, when the be sure to go to the THX Audio Setup screen and THX indicator is on, THX features are automatically choose the setting that closely corresponds to the Dialogue Normalization (DialogNorm) is a feature of added in Cinema modes (e.g.

  • Page 52: Displaying Source Information

    Playback Displaying Source Information Using the Sleep Timer Setting the Display Brightness You can display various information about the current With the sleep timer, you can set the AV receiver to You can adjust the brightness of the AV receiver’s input source as follows.

  • Page 53: Changing The Input Display

    You can set which speakers you want to use by The Whole House Mode is useful when you want to When you connect an -capable Onkyo priority. add extra background music to your home party; this component, you must configure the input display so...

  • Page 54: Using Easy Macros

    First, the TV, the cable set-top box, and the AV receiver are turned on. Then the input selector is set Examples: to “CBL/SAT”. If you wished to use MY MUSIC to start the Onkyo ■ MY MUSIC CD player, you would press and hold down...

  • Page 55: Using The Home Menu

    Playback components connected through HDMI, you can a short while after the AV receiver is turned on. Using the Home Menu easily switch between inputs as their previews are Please wait until it becomes operable. displayed on a single screen. Press ENTER to display the network service The Home menu provides quick access to frequently Press ENTER to display the main preview...

  • Page 56: Advanced Operations

    Advanced Operations ■ Input Using the Quick Setup You can select input sources and view the following information: the name of input selectors, input assignments, the name of the device paired with the AV receiver via Bluetooth, radio Advanced Operations information, and ARC function setting.

  • Page 57: Using The Audio Settings Of Quick Setup

    Advanced Operations • The video preview is not displayed when: Phase Matching Bass Using the Audio Settings of Quick – HDMI IN 5/6/7 is the current HDMI input source, or Setup – No signal is present on the current input source. ■...
  • Page 58 Advanced Operations Speaker Levels • The setting is stored individually for each input selector. • With Dolby TrueHD sources, the Late Night function cannot • “Dynamic EQ” and “Dynamic Volume” cannot be selected be used when “TrueHD Loudness Management” is set to when any of the THX listening modes is selected, with “Off”.
  • Page 59 Advanced Operations Re-EQ (Re-Equalization) Movie soundtracks were designed for playback in large movie theaters using professional equipment. If the movies were not remixed for the home theater, the tonal balance of the soundtracks can be excessively bright and harsh when played back over home audio equipment.

  • Page 60: Using The Setup Menu (Home)

    Advanced Operations Main menu item Sub menu item Using the Setup Menu (HOME) Setup Menu Items 5. Listening Mode Preset BD/DVD (➔ page CBL/SAT Main menu item Sub menu item STB/DVR 1. Input/Output Assign Monitor Out (➔ page GAME1 HDMI Input GAME2 Component Video Input RECEIVER...

  • Page 61: Input/Output Assign

    Advanced Operations Explanatory Notes 1. Input/Output Assign Note • The “HDMI Through” setting is only available for the HDMI 2. Speaker Setup Monitor Out OUT MAIN jack (➔ page 75). Changing the “Monitor Out” setting manually Speaker Configuration On the “Monitor Out” settings, you can select whether or not to have the video sources’...
  • Page 62 Advanced Operations ■ HDMI Input BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, TV/CD, PHONO • You can see the picture by pressing ENTER to check the If you connect a video component to an HDMI input, HDMI1, HDMI2, HDMI3, HDMI4, HDMI5, HDMI6, “Resolution”...

  • Page 63: Speaker Setup

    Advanced Operations Component Video Input Digital Audio Input 2. Speaker Setup If you connect a video component to a component If you connect a component to a digital audio input, Here you can check the settings made by video input, you must assign that input to an input you must assign that input to an input selector.
  • Page 64 Advanced Operations ■ ■ ■ Speakers Type(Front) Subwoofer Surround Back Ch Normal: 1ch: Select this if you’ve connected your front Select if only one surround back speaker L is speakers normally. connected. ■ Front Bi-Amp: 2ch: Full Band Select this if you’ve bi-amped your front Select if two (left and right) surround back 40Hz to 80Hz(THX) to 100Hz, 120Hz, 150Hz, speakers.
  • Page 65 Advanced Operations ■ ■ Double Bass Left, Front Wide Left, Front High Left, Center, • The test tone is output at the standard level for THX, which is 0 dB (absolute volume setting 82). If you normally listen Front High Right, Front Wide Right, Right, at volume settings below this, be careful because the test Surround Right, Surround Back Right, Surround This setting is NOT set automatically by...
  • Page 66 Advanced Operations ■ THX Loudness Plus to select “Channel”, and then use THX Loudness Plus is a new volume control to select another speaker. technology featured in THX Ultra2 Plus™ and THX Repeat steps 1 and 2 for each speaker. Select2 Plus™...

  • Page 67: Audio Adjust

    Advanced Operations ■ Dolby PL IIz Height Gain 3. Audio Adjust ■ With the Audio Adjust functions and settings, you can PL IIx Music (2ch Input) adjust the sound and listening modes as you like. These settings apply to only 2-channel stereo High sources.

  • Page 68: Source Setup

    Advanced Operations ■ TrueHD Loudness Management Theater-Dimensional DTS and DTS-HD High Resolution sources DSD (Super Audio CD) sources ■ Listening Angle 4. Source Setup Wide: This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source. Select if the listening angle is greater than 30 Items can be set individually for each input selector.
  • Page 69 Advanced Operations ■ Dynamic EQ play at reference level when the master volume About Audyssey Dynamic EQ ® control is set to the 0 dB position. At that level you Audyssey Dynamic EQ solves the problem of can hear the mix as the mixers heard it. deteriorating sound quality as volume is decreased by Audyssey Dynamic EQ is referenced to the standard taking into account human perception and room...
  • Page 70 Advanced Operations IntelliVolume – “HDMI CEC (RIHD)” is set to “On” (➔ page 74) and Name input area you’re listening through your TV speakers. • A/V Sync is disabled when the Pure Audio or Direct ■ IntelliVolume 4 - 4. Name Edit BD/DVD listening mode is used with an analog input source.
  • Page 71 Advanced Operations ■ Picture Adjust mode. See “Monitor Out” for details on the Film Mode *2*4 monitor output setting (➔ page 61). Video: Using Picture Adjust, you can adjust the picture “Film Mode” detection is not applied and the ■ Picture Mode quality and reduce any noise appearing on the input signal is handled as a video source.
  • Page 72 Advanced Operations ■ Audio Selector Setting the Incoming Digital Signal (Fixed *1*2*4 Mode) –50 to 0 to +50 ■ With this setting, you can adjust the color hue Audio Selector ■ between “–50” and “+50”. ARC: Fixed Mode The audio signal from your TV tuner can be sent Off: ■...

  • Page 73: Listening Mode Preset

    Advanced Operations • For the “BLUETOOTH” input selector, only “Digital” 5. Listening Mode Preset 6. Miscellaneous is available. You can assign a default listening mode to each input Volume Setup ■ Analog/PCM/Digital source that will be selected automatically when you With this setting, you can specify the listening mode select each input source.

  • Page 74: Hardware Setup

    Advanced Operations ■ Headphone Level 7. Hardware Setup Note –12dB to 0dB to +12dB • When the setting is set to “On” and the menu is closed, the With this setting, you can specify the headphone Tuner names of connected -compatible components and volume relative to the main volume.
  • Page 75 Advanced Operations ■ ■ ■ HDMI Through Audio TV Out (Main) Audio TV Out (Sub) BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, AUX, TV/CD, PHONO: This preference determines whether the incoming This preference determines whether the incoming Selects the input source for which the HDMI audio signal is output from HDMI OUT MAIN.
  • Page 76 Advanced Operations ■ Audio Return Channel Sub Window • The Auto Standby function does not work when Zone 2/3 is Multi: Displays preview thumbnails all at once. Auto: ■ HDMI Through The audio signal from your TV tuner can be sent Single: to HDMI OUT MAIN of the AV receiver.
  • Page 77 Advanced Operations ■ ■ Network MAC Address Proxy Port This is the AV receiver’s MAC (Media Access If you’re using a Web proxy, enter a proxy port This section explains how to configure the AV Control) address. This address cannot be changed. number here.

  • Page 78: Remote Controller Setup

    Setup start pairing. 1, 2, or 3 Locked When several Onkyo components are used in the Unlocked same room, their remote ID codes may overlap. To When “Locked” is selected, the setup menus will be • If pairing setting is not set, “Ready” appears on-screen differentiate the AV receiver from other components, display.

  • Page 79: Multi Zone

    Advanced Operations Multi Zone In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. Making Multi Zone Connections Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional Amplifier This setup allows you to select different sources for Main room and Zone 2.

  • Page 80: Controlling Multi Zone Components

    Advanced Operations 12V Trigger Out To turn on Zone 2/3 and select an input source, Press ZONE repeatedly, then point the remote press ZONE 2 or ZONE 3 followed by an input controller at the AV receiver and press When Zone 2 is turned on, the output from the selector button within 8 seconds.

  • Page 81: Using The Remote Controller In Zone And Multiroom Control Kits

    Advanced Operations Muting Zone 2 • Even if you repeatedly press the remote controller’s ZONE From the connecting block to select zones, the last zone selection will be retained once you have switched to other components by pressing other ■ Operating on the remote controller REMOTE MODE after pressing ZONE.

  • Page 82: Controlling Other Components

    • Remote control codes cannot be entered for to select “Not Listed”, and then press RECEIVER and the multi zone button. BD/DVD Onkyo Blu-ray Disc player (➔ page ENTER. • Only TV remote control codes can be entered for TV.

  • Page 83: Remapping Colored Buttons

    Controlling Onkyo components without Note If you want to control an Onkyo component by • The learning command is also reset. pointing the remote controller directly at it, or you • To reset the REMOTE MODE buttons to their default want to control an Onkyo component that’s not...

  • Page 84: Resetting The Remote Controller

    Controlling Other Components Controlling Apple TV Resetting the Remote Controller supported by the AV receiver is the CEC By programming the supplied remote controller with system control function of the HDMI standard. You can reset the remote controller to its default the appropriate remote control code, you can use it to settings.
  • Page 85 Controlling Other Components ■ ■ TV operation DVD player/DVD recorder operation Press the appropriate REMOTE Available buttons Available buttons MODE button first. Number: 1 to 9, 0 TOP MENU DISPLAY , INPUT, TV VOL / GUIDE / / / , ENTER SOURCE Number: +10 DISPLAY...
  • Page 86 Controlling Other Components ■ Satellite receiver/Cable receiver operation Press the appropriate REMOTE Available buttons MODE button first. GUIDE Number: 1 to 9, 0 Number: +10 / / / , ENTER SETUP DISPLAY SOURCE MUTING CH +/– A (Red) B (Green) PREV CH C (Yellow) RETURN...

  • Page 87: Using The Onkyo Dock

    AV receiver will RI Dock For the latest information on the Onkyo Dock automatically switch to the input to which the RI Dock components, see the Onkyo web site at: With the RI Dock, you can easily play the music of is connected.

  • Page 88: Controlling Your Ipod/Iphone

    ). In this case, make an DISPLAY turns on the backlight for a few seconds. connection and enter the remote control code 81993 This button does not turn the Onkyo DS-A2 or DS-A2X (with RI Dock on or off. Also, your iPod/iPhone may not respond the first time you press this button, in which case ■...

  • Page 89: Learning Commands

    (about 3 seconds). • Remote controller buttons such as Play, Stop, and Pause are preprogrammed with commands for controlling Onkyo On the supplied remote controller, press the CD players, cassette decks, and DVD players. However,...

  • Page 90: Using Normal Macros

    Controlling Other Components When you’ve finished, press ACTIVITIES Using Normal Macros again. You can program the remote controller’s ACTIVITIES ACTIVITIES button flashes twice. to perform a sequence of remote control actions. If you enter 32 commands, the process will Example: finish automatically.

  • Page 91: Appendix

    Make sure that the polarity of the speaker cables is correct, AV receiver before contacting your Onkyo dealer. and that the bare wires are in contact with the metal part of ■...
  • Page 92 Appendix ■ The front high, front wide and surround back If the input signal format is set to “PCM” or “DTS”. Set it to If the volume level of each individual speaker has been speakers produce no sound “Off”. (➔ page adjusted to high positive values, then the maximum master volume possible may be reduced.
  • Page 93 ■ Reception is noisy, FM stereo reception is noisy, your TV must be connected to either the HDMI output(s) or If it’s an Onkyo component, make sure that the cable or the FM STEREO indicator doesn’t light COMPONENT VIDEO OUT.
  • Page 94 Appendix The entered remote control code may not be correct. If If you still can’t control your iPod/iPhone, start playback by Place the AV receiver away from the devices emitting more than one code is listed, try each one. pressing your iPod/iPhone model’s Play button. Remote electromagnetic waves on the 2.4 GHz band (microwave operation should then be possible.
  • Page 95 Appendix ■ ■ ■ Bluetooth connection cannot be built Can’t connect to the AV receiver from a Web The sound changes when I connect my browser headphones When building a Bluetooth connection between the AV receiver and your Bluetooth-enabled device for the first If you’re using DHCP, your router may not always allocate When a pair of headphones is connected, the listening time, if the connection is fail, you need to power off your...
  • Page 96 Appendix button simultaneously. While holding down the input • We assume no responsibility whatsoever for any Radio Wave Caution selector button, press HOME until “Video ATT :On” error or damage of network environment or access appears on the AV receiver’s display. Then, release device resulting from the use of this apparatus.
  • Page 97 LAN device. • We assume no responsibility whatsoever for any Onkyo is not responsible for damages (such as CD damages resulting from the use of this apparatus rental fees) due to unsuccessful recordings caused except in the cases deemed acceptable under the by the unit’s malfunction.
  • Page 98 Appendix DISCLAIMER Video Resolution Chart Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this The following tables show how video signals at different resolutions are output by device, and its affiliates (collectively, “Company”).

  • Page 99: Firmware Update

    (➔ page 74). choose from the following two methods: update via own risk. Onkyo will not be liable and you will have • Turn off the controller device connected via RS232 network, or update via USB storage. Choose the one no remedy for damages for any claim of any kind and network.
  • Page 100 Onkyo Support. Errors during an update via network Congratulations! You now have the latest Error Code Description firmware installed on your Onkyo AV receiver. Updating the Firmware via USB -01, The Ethernet cable was not detected. Reconnect the cable properly.
  • Page 101 (Alpha-numeric characters on the program. When this occurs, you can still view the front display are denoted by asterisks.) Refer to the Download the firmware file from the Onkyo update progress on the AV receiver’s display. following table and take appropriate action.

  • Page 102: About Hdmi

    Appendix About HDMI Supported Audio Formats About Copyright Protection • 2-channel linear PCM (32–192 kHz, 16/20/24 bit) The AV receiver supports HDCP (High-bandwidth Designed to meet the increased demands of digital Digital Content Protection) , a copy-protection TV, HDMI (High Definition Multimedia Interface) is a •...

  • Page 103: Network/Usb Features

    ■ • Onkyo accepts no responsibility whatsoever for the loss or Internet Access (for Internet radio) ■ damage to data stored on a USB device when that device...
  • Page 104 Appendix ■ ■ • Operation is not guaranteed for all USB devices, which WMA Lossless (.wma or .WMA) LPCM (Linear PCM) includes the ability to power them. • Sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, •...

  • Page 105: License And Trademark Information

    Apple TV is a trademark of Apple Inc., registered in the United States and other counties.” are trademarks of Dolby Laboratories. U.S. and other countries. Music Optimizer™ and “WRAT” are trademarks of Onkyo Corporation. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

  • Page 106: Specifications

    1 Vp-p/75 Ω (Component Y) trademarks owned by Bluetooth SIG, Inc. and any use of 0.7 Vp-p/75 Ω (Component P such marks by Onkyo is under license. Other trademarks and trade names are those of their respective owners. Rated Output Power 1 Vp-p/75 Ω...
  • Page 107 Appendix ■ ■ Bluetooth Section HDMI Others Input IN 1, IN 2, IN 3, IN 4, IN 5, IN 6, IN 7, Setup Mic Communication system AUX INPUT RS232 Bluetooth Specification version 2.1 + Output OUT MAIN, OUT SUB EDR (Enhanced Data Rate) Video Resolution 1 (Front) Maximum communication range...
  • Page 108 Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ Asia, Oceania, Middle East, Africa Please contact an Onkyo distributor referring to Onkyo SUPPORT site. http://www.intl.onkyo.com/support/ The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update.
  • Page 109 Using Internet Radio Using Internet Radio Using Multiple Accounts Pandora ® internet radio The AV receiver supports multiple user accounts, –Getting Started (U.S. only)..... 2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
  • Page 110 Pandora uses to create your personal radio After you have created your account and stations stations. you can return to your Onkyo receiver and press I’m tired of this track: PANDORA, the PANDORA logo, and the Pandora enter to begin listening to your personalized...
  • Page 111 Music Guide: remote control. account at You can play tracks from Genres, Top Artists, Enabled buttons: www.rhapsody.com/onkyo Top Albums, Top Tracks, New Releases, and , RANDOM, REPEAT If you have an existing Rhapsody account, select Staff Picks. Note “Sign in to your account”...
  • Page 112 If you have an existing SIRIUS account, you can The playback screen for the selected channel Your Onkyo AV receiver includes a free trial of sign in by selecting “Sign In”. Enter your user appears and you can listen to SiriusXM Internet SiriusXM Internet Radio.
  • Page 113 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
  • Page 114 Using Internet Radio You can control the tracks with the buttons on Using Slacker Personal Radio the remote control. If you do not have an account, create one on Enabled buttons: the Slacker website (www.slacker.com) with ■ Menu Items your computer. Rate Song as Favorite: If you already have a Slacker account, select Stores information to server, making it more likely...
  • Page 115 Using Internet Radio Playing Contents on the AV Receiver The track at the top of the music list is automatically Using MP3tunes played back. Listen to your music collection on your home stereo in Use / to select a track and press ENTER or complete digital fidelity without a personal computer •...
  • Page 116 Utilisation d’une webradio Utilisation d’une Utilisation de plusieurs comptes Pandora ® internet Radio L’ampli-tuner AV prend en charge plusieurs comptes –Pour commencer webradio utilisateur, ce qui signifie que vous pouvez librement (États-Unis uniquement)......2 commuter entre plusieurs connexions. Après avoir enregistré...
  • Page 117 « au repos » et Pandora ne la lira compte et de vos stations, vous pouvez retourner plus pendant un mois. à votre récepteur Onkyo et appuyez sur entrée Create station from this artist : PANDORA, le logo PANDORA, et l’habillage pour écouter votre webradio Pandora...
  • Page 118 à partir de , RANDOM, REPEAT albums, des meilleures pistes, des nouveautés et www.rhapsody.com/onkyo Remarque des sélections du personnel. Si vous possédez déjà un compte Rhapsody, • Sur les canaux Rhapsody, certaines touches ne Rhapsody Channels : sélectionnez «...
  • Page 119 L’écran de lecture du canal sélectionné s’affiche pouvez y accéder en sélectionnant « Sign In ». et vous pouvez écouter SiriusXM Internet Radio. Votre ampli-tuner AV Onkyo comprend un essai Saisissez votre nom utilisateur et votre mot de gratuit de SiriusXM Internet Radio. L’écran « Account Vous pouvez contrôlez les pistes avec les...
  • Page 120 « Neighbours ». pouvez vous y connecter pour sélectionner Votre nouvel ampli-tuner AV Onkyo est très intelligent. « Sign in to your account ». Saisissez votre Account Info : Si vous avez un compte Last.fm gratuit, il garde une nom utilisateur et votre mot de passe dans Vérifiez les informations de votre compte.
  • Page 121 Utilisation d’une webradio Vous pouvez contrôlez les pistes avec les Utilisation de Slacker Personal Radio touches sur la télécommande. Si vous ne possédez pas de compte, créez-en Boutons activés : un à partir du site Web de Slacker ■ Eléments du menu (www.slacker.com) à...
  • Page 122 Uso de Internet Radio Uso de Internet Radio Uso de múltiples cuentas Pandora ® Internet Radio El receptor de AV permite múltiples cuentas de –Primeros pasos (solo EE.UU.)....2 usuario, lo que quiere decir que se puede cambiar Procedimientos comunes en el menú libremente entre varios usuarios.
  • Page 123 Una vez creada su cuenta y sus I’m tired of this track: PANDORA, el logotipo de PANDORA logo, y la emisoras, puede regresar al receptor Onkyo y Si se cansa de un tema, puede “silenciarlo” de imagen corporativa de Pandora son marcas...
  • Page 124 Para utilizar Rhapsody, necesitará una cuenta. Si todavía no tiene una, puede crear una nueva en Music Guide: Puede controlar las pistas con los botones del www.rhapsody.com/onkyo mando a distancia. Puede reproducir canciones por géneros, artistas Si ya tiene una cuenta Rhapsody, seleccione principales, álbumes principales o canciones...
  • Page 125 Aparecerá la pantalla de reproducción de la seleccionando “Sign In”. Escriba su nombre de emisora seleccionada y ahora usted podrá Su receptor de AV Onkyo incluye una prueba gratuita usuario y contraseña en la pantalla de teclado escuchar SiriusXM Internet Radio.
  • Page 126 “Uso de múltiples cuentas” (➔ página 1). Se Ban this track: Radio sin anuncios en su receptor de AV Onkyo sin puede iniciar sesión desde la pantalla “Users”. Se guarda la información sobre la canción en el necesidad de un ordenador.
  • Page 127 Uso de Internet Radio Puede controlar las pistas con los botones del Uso de Slacker Personal Radio mando a distancia. Si no tiene una cuenta, cree una en el sitio web Botones activados: de Slacker (www.slacker.com) con su ■ Elementos del menú ordenador.
  • Page 128 Y1212-1 SN 29401478IRUS * 2 9 4 0 1 4 7 8 I R U S *...
  • Page 129 Using Internet Radio Using Internet Radio Using Multiple Accounts The AV receiver supports multiple user accounts, Using Last.fm Internet Radio ......2 which means you can freely switch between several Common Procedures in Internet Radio logins. After registering user accounts, login is Menu performed from the “Users”...
  • Page 130 “Sign in to your Account Info: Your new Onkyo AV receiver is very clever. If you account”. Enter your user name and password in Confirm your account information. have a free Last.fm account, it will keep track of all the next keyboard screen.
  • Page 131 Internetradio verwenden Internetradio verwenden Verwendung mehrerer Konten Der AV-Receiver unterstützt mehrere Nutzerkonten, Verwendung von Last.fm Internet Radio ..2 was bedeutet, dass Sie frei zwischen mehreren Allgemeine Verfahren bei den Logins umschalten können. Nach der Anmeldung der Nutzerkonten wird das Login vom „Users“ Bildschirm Internetradio-Menüs aus vorgenommen.
  • Page 132 Verwenden Sie / , um „Sign in to your Lieblingsmusik merkt... Library“, „Your Neighbourhood“ und „Your account“ auszuwählen und dann drücken Sie Recommendations“). Ihr neuer Onkyo AV-Receiver ist äußerst clever. Wenn Sie ENTER. ein kostenloses Last.fm-Konto eingerichtet haben, werden Profile: Wenn Sie über einen bestehenden Last.fm Konto darin alle kürzlich abgespielten Titel gespeichert.
  • Page 133 Remote Control Codes Remote Control Codes While holding down the REMOTE MODE button to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/Remote indicator lights. On Integra products, button names are capitalized. For example, “Remote Mode” button and “Display”...
  • Page 134 Remote Control Codes Codes de télécommande Códigos de control remoto Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez Manteniendo pulsado el botón REMOTE MODE para el cual desea introducir un associer un code, pressez et maintenez enfoncé le bouton [DISPLAY] (pendant código, pulse y mantenga presionado el botón [DISPLAY] (aproximadamente 3 environ 3 secondes).
  • Page 135 Remote Control Codes Codici del telecomando Fernbedienungscodes Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi). mochten, und drucken Sie (ca.
  • Page 136 Remote Control Codes Afstandsbedieningscodes Fjärrstyrningskoder Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code Håll ned knappen för det REMOTE MODE som du vill tilldela en kod samtidigt wilt toewijzen de [DISPLAY] toets ingedrukt (ongeveer 3 seconden). som du trycker och håller ned [DISPLAY] (i cirka 3 sekunder).
  • Page 137 Remote Control Codes 遥控代码 按住想指定编码的 REMOTE MODE （遥控模式）按钮的同时，按住 [DISPLAY （显示）] （大约 3 秒钟） 。 REMOTE MODE （遥控模式）按钮 / 遥控指示灯亮起。 Integra 产品上的按钮名称单词首字母大写。例如， “Remote Mode （遥控模 式） ”按钮和 “Display （显示） ”按钮。 注意： • [RECEIVER （接收机）] 和多区域按钮不能输入遥控编码。 • • 只能为 [TV （电视）] 输入电视遥控编码。 •...
  • Page 138 Remote Control Codes Dedicated Onkyo Receiver Cable Set Top Box Cable Set Top Box Cable/PVR Combination Default 62503 mio TV 02802 Toshiba 01509 Samsung 01877 Zone 2 62506 Motorola 01376, 00858, 01562, 01582 Scientific Atlanta 01877, 01982 01982, 01998, 02378...
  • Page 139 Aiwa 70157 Marantz 40029 Memorex 70032 Technics 70029, 70303 Arcam 70157 Myryad 40029 Meridian 70157 Thorens 70157 Atoll Electronique 70157 Onkyo 42157 Micromega 70157 Thule Audio 70157 Audio Research 70157 Optimus 40027 Miro 70000 Traxdata 70626 Audiolab 70157 Philips 40029...
  • Page 140 01251, 01334, 01626 Boston 01251 DigiQuest 01300, 01457, 01631 00775 Receiver Boxer 01458 Digisky 01457 Gold Box 00853 Onkyo 52503 British Sky 00847, 01175, 01662 DigitalBox 01100, 01631 Gold Vision 01631 Broadcasting Digiwave 01631 GoldMaster 01334 Satellite Set Top Box...
  • Page 141 Remote Control Codes Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Satellite Set Top Box Hama 01567 Leiko 01626 Pace 00847, 00853, 00887, Sat Industrie 01611 01175, 01323, 01356, Hanseatic 01100 Lemon 01334 SAT+ 01409 01423, 01662, 01693, Hirschmann 00173 Lenoxx...
  • Page 142 Remote Control Codes Satellite Set Top Box Satellite Set Top Box SAT/PVR Combination SAT/PVR Combination Star 00887 00642 BskyB 01175, 01662 Schneider 01206 Stream System 01300 00879, 01356 Bush 01645 Sedea Electronique 01206 Strong 00853, 00879, 01284, United 01251, 01626, 02418 Canal Satellite 02657 01175, 01662, 01693,...
  • Page 143 Remote Control Codes Television Television Television Television Akai 10178, 10556, 10037, Basic Line 10556, 10037, 10668, Casio 10037 Dick Smith 10698 10714, 10715, 10208, 11037 Electronics Cathay 10037 11675 Baur 10037, 10195, 10512 Digatron 10037 10037 Akiba 10037 Beaumark 10178 Digihome 11667 Centrum...
  • Page 144 Remote Control Codes Television Television Television Television Erres 10037 Genesis 10037 Hisense 10556, 10508, 10208, 10037 11363, 12098 10171 Genexxa 10037 11709 Hitachi 10150, 10178, 10037, 10037 10171, 11864, 11886 Jinfeng 10208 10634, 11037, 10508, Euroman 10037 Godrej 11585 Jinxing 10556, 10037, 10698 10499, 10578, 11576, Europa...
  • Page 145 10037, 10714, 10668, Medion 10556, 10037, 10714, Naiko 10037 Onix 10698 11037, 12001 10668, 11037, 10698, Nakimura 10037 Onkyo 11807, 13100, 13500 10512, 11248, 11585, Linsar 11585 National 10508, 10208 11667, 11709 11667, 12001, 12719 Local India TV 10208 10178, 10653, 10508,...
  • Page 146 Remote Control Codes Television Television Television Television Phoenix 10037 Reflex 10037, 10668, 11037 Sei-Sinudyne 10037 SunBriteTV 11610 Phonola 10556, 10037 Relisys 11585 Serie Dorada 10178 Sungoo 11248 Pioneer 10037, 10698, 10512, Remotec 10171, 10037 Shanghai 10208 Sunny 10037 11457, 11636, 12171 Reoc 10714 Sharp...
  • Page 147 Remote Control Codes Television Television Television Technosonic 10556, 10625, 10499, Toyoda 11709 11365, 12098 Humax 20739 11324 TRANS-continents 10556, 10037, 10668, Walker 11667 Panasonic 20614, 20616 Techvision 11709 11037 Waltham 10037, 10668, 11037 Philips 20739 Techwood 11037, 11667 Transonic 10037, 10698, 10512, Wansa 12098 ReplayTV...
  • Page 148 Alba 30539, 30713 30741 Dynex 32596 30503, 30539, 30623, Ambiance 33052 30741, 31602 30867, 31597, 31602, Dyon 33052 Amstrad 30713 Onkyo 30503, 30627, 31612, 32855 eBench 31152 32147, 30571, 31634 Anthem 32820 Kendo 30713 Elfunk 30713 Oppo 30575, 32545 Aristona...
  • Page 149 32414, 32432, 33444 Vizio 32563 Pioneer 30631, 32860 Skantic 30539, 30713 Momitsu 33052 Vtrek 32587 30646 SM Electronic 31152 Onkyo 32147, 32900, 32910, Waltham 30713 30522 33100, 33101, 33500, Smart 30713 Wellington 30713 33501 Samsung 30490, 31635 Sony 30533, 30864, 31033,...
  • Page 150 HD-DVD Odys 12719 Integra 32901, 33104 33504 Panasonic 12170 30741 Philips 11454, 10556, 11394, 30539 Microsoft 32083 Powerpoint 10698 Onkyo 32901, 33104 33504 Prosonic 12001 Xbox 32083 Pvision 12001 TV/DVD Combination 12746, 12932 Akai 11675 Schaub Lorenz 12001 Black Diamond...
  • Page 151 Remote Control Codes Memo...
  • Page 152 Y1303-2 SN 29401094A * 2 9 4 0 1 0 9 4 A *...

Table of Contents

Save PDF