Front Panel Audio Connector; Intelh81 Serial Ata 6.0Gb/S Connector - Asus H81M-PLUS User Manual

3. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
H81M-PLUS
H81M-PLUS Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard's high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section 2.6.7 Onboard Devices Configuration for
details.
4. Intel H81 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~2 [yellow])
®
This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s
signal cables.
H81M-PLUS
H81M-PLUS SATA 6.0Gb/s connectors
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
See section 2.6.3 SATA Configuration for details.
ASUS H81M-PLUS
AAFP
PIN 1
HD-audio-compliant
pin definition compliant definition
Legacy AC'97
1-15