7. Press Power Button until BIOS POST is finished, then remove the conductivity tool from
the RTCRST# jumper.
8. Restart the system. Press F2 to enter BIOS Setup menu.
9. If there is no Password request, BIOS Password is cleared.
10. If a password is requested, repeat Steps 1 through 9.
Clear CMOS Jumper
0
Figure 5-4. CMOS Jumper
Table 5-3. CMOS Jumper
Item
Description
RTCRST#
Clear CMOS Jumper
5-7
Jumper and Connector Locations
Need help?
Do you have a question about the Aspire V3-731 and is the answer not in the manual?
Questions and answers