Canon imagePROGRAF iPF6400 Basic Manual page 24

Removing Sheets
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The paper is ejected from the front of the printer.
Important
Removing heavyweight sheets from the front paper feed slot
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Paper tab (
•
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
As the printer ejects the paper, the paper is stopped momentarily with the trailing edge still held in the roll-
ers.
5
Press the OK button.
The sheet can now be removed.
6
Remove the sheet, keeping the front edge level as
you pull it out.
Important
7
Press the OK button.
Important
24
•
If the trailing edge of a sheet is not ejected, pull the sheet out, keeping the front edge level. Accidentally re-
moving the sheet at an angle may scratch the printed surface.
).
If the Tab Selection screen is not displayed, press the Menu button.
•
If POP Board is accidentally removed at an angle, it may scratch the printed surface.
•
Always remove the sheet before pressing the OK button. If you do not remove the sheet before step 7, it may
go back inside the printer, leaving roller marks across the trailing edge of paper.
iPF6400
Basic Guide