Sharp PA-VR5E Operation Manual page 26

Press the
3
(1 to 99 minutes), then press the OK button.
The timer starts running.
• To stop the timer while it is running, press the STOP/MENU
button.
Hold function
Setting the HOLD switch to the locked
recorder in its current status and disables the other buttons. Use
this feature to prevent the recorder's buttons from being pressed by
mistake. To unlock the recorder status, set the HOLD switch to the
unlocked position.
Storing your recordings on a PC (Only possible with the PA-VR10E)
You can store material captured using the digital voice recorder on
a personal computer in the form of data files. It is also possible to
transfer such data files from the personal computer back to the
digital voice recorder at a later date.
Your personal computer must meet the system requirements listed
below in order to connect the digital voice recorder and store
recorded material.
G Personal Computer Running Microsoft Windows
Supported models
Supported
operating systems
USB port
Note:
If your PC is running Windows 98 or 98 SE, you will need to install
a dedicated USB driver. You can download the USB driver from the
website at the URL given below. After downloading the driver, read
the instructions on the website for how to install it.
Digital Voice Recorder Support page:
http://www.sharp.co.uk/voicerecorder
• Users of other OS versions should read the information provided
on the website support pages.
L M
(+) or (-) cursor button to select a timer delay
IBM PC/AT compatible
Microsoft
XP Home/Me/2000 Professional/98/98SE
One USB port (version 1.1 or above)
required to connect to the digital voice
recorder
® ®
Windows XP Professional/
position locks the
25