Sharp AJ-6000 Operation Manual page 58

THE PRINT HEAD
When the print head latch is moved up and down without replacing any print head.
New Black head?
2.No
Select "No".
New Colour head?
2.No
Select "No".
When all the ink tanks are replaced after opening the front cover.
Cleaning the Print
Head...
The unit automatically cleans all the print heads.
When the black ink tank is replaced after opening the front cover.
New colour ink?
1.No
Select "No".
Cleaning the Print
Head...
The unit cleans only the black
print head.
When the colour ink tanks are replaced after opening the front cover.
New black ink?
1.No
Select "No".
Cleaning the Print
Head...
The unit cleans only the colour
print head.
When either of the ink tanks isn't replaced after opening the front cover.
New ink cartridge?
1.No
Select "No".
This unit does not clean
the print heads.
Run alignment?
1.Yes
Select "Yes".
The unit will begin to print the alignment
patterns for print head alignment. Align
the print heads after that.
Printing...
Alignment Patterns
The unit automatically aligns the print head when the print head has been
replaced. Refer to "ALIGNING THE PRINT HEADS" for how to align the print
heads. (See page 16)
Print a test page to check copy quality.
13
For details refer to "PRINTING A TEST PAGE". (See the next page)
56
Selected "Yes".
Cleaning the Print
Head...
The unit cleans all the print
heads.
Selected "Yes".
Cleaning the Print
Head...
The unit cleans all the print
heads.
Selected "Yes".
Cleaning the Print
Head...
The unit cleans all the print
heads.
The unit will return to be ready.
*Be sure to align the print
Select "No".
heads when you move the
print head latch. Whenever
you raise or lower the print
head latch, the print heads
slip off the right position.