Physical/Logical View - NEC Express5800 series User Manual

3.2.2

Physical/Logical View

On the Physical/Logical View, the physical and logical drives connected to the disk array controller
are displayed in the tree format, respectively.
If you put the cursor on a displayed object and right-click the object, then you can select and run an
available feature. Menu displayed by right-clicking is called "Context Menu". The contents of
"Context Menu" depend on the available MegaRAID Storage Systems(SAS/SATA).
Menu displayed by right-clicking Controller [Context Menu]:
The following shows a sample menu which may be displayed by right-clicking the
Controller.
[Enable Alarm]:
Enable the alarm feature.
The alarm beeps if a fault occurs in the disk array controller. The alarm continues until
you select [Silence Alarm] described later.
[Disable Alarm]:
Disable the alarm feature.
With the alarm feature disabled, the alarm does not beep if a fault occurs in the disk
array controller.
[Silence Alarm]:
Stop the alarm if it beeps.
[Start Patrol Read / Stop Patrol Read]:
Start/stop the Patrol Read feature.
The screen display varies depending on the execution status of the Patrol Read feature.
[Advanced Operations] → [Configuration]
→ [Configuration Wizard]:
Create a logical drive. See Section "3.3.1 Creating Logical Drive" for how to create a
logical drive.
→ [Add Configuration from file]:
Recover the saved configuration.
→ [Save Configuration]:
Save the configuration in a hard disk drive or floppy disk.
→ [Clear Configuration]:
Clear the information on the disk array configuration.
Operation 19