Mute Function; Setting The System To Switch Off Automatically; Connecting Headphones; Microphone Function(Option) - Samsung MM-UC8 Instruction Manual

MUTE Function

B
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
Press MUTE ( ).
2
To switch the sound back on (at the same volume as before), press
MUTE again or the VOLUME buttons.
MUTE
TUNER TIMER/CLOCK TIMER ON/OFF
BAND
USB/AUX PROGRAM/SET
MO/ST
Setting the System to Switch off
Automatically
While listening to a compact disc or a cassette, you can set the
system to switch off automatically
Example: You wish to go to sleep to music.
1
Press SLEEP or MULTI JOG(PUSH ENTER) button until the option
is selected .
Result: The following indications are displayed:
90
2
MIN
Press SLEEP one or more times or turn MULTI JOG(PUSH ENTER)
knob to indicate how long the system should continue playing before
it switches off:
90 MIN 60 MIN 45 MIN
OFF SLEEP 15 MIN 30 MIN
At any time, you can:
Check the remaining time by pressing SLEEPor MULTI
JOG(PUSH ENTER).
Change the remaining time by repeating Steps 1 and 2.
3
To cancel SLEEP function, press SLEEP or turn MULTI JOG(PUSH
ENTER) knob one or more times until OFF is display.
USB/AUX PROGRAM/SET
MO/ST
SLEEP REC./PAUSE SURROUND XT
COUNTER RESET USB REC.
REV.MODE SHUFFLE DEMO/DIMMER
24

Connecting Headphones

You can connect a set of headphones to your micro
component system so that you can listen to music or radio program-
mers without disturbing other people in the room. The earphones
must have a 3.5 ø jack or an appropriate adapter.
Connect the headphones to the PHONES jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage your
hearing.
Microphone Function (option)
The microphone enables the user to mix in his or her vocals to
sing -along with the music.
Preparation
Plug the microphone with a 3.5mm jack into microphone terminal.

Safety Precautions

The following diagrams illustrate the precautions to be taken when
using or moving your micro component system.
Ambient operating conditions: Do not expose the unit to direct sun
Ambient temperature 5°C-35°C radiation or other heat sources.
Humidity 10-75% This could lead to overheating and
malfunction of the unit.
Do not place potted plants or vases During thunderstorms, disconnect
on top of the unit. Moisture entering the main plug from the socket.
the unit could lead to dangerous Main voltage peaks due to light-
electric shock and can cause ning could damage the unit.
equipment damage. In such events
immediately disconnect the main
plug from the socket.
VOLUME
UP
DOWN
Remove the batteries from the When using headphones, take care
remote control, if not used for any not to listen at excessive volumes.
extended period. Extended use of headphones at
Leaking batteries can cause serious high volumes will lead to hearing
damage to the remote control. damage.
Do not place heavy items on the Do not remove any equipment panels.
main lead. Main cable damage can The inside of the unit
lead to damage of the equipment (fire contains live components, which
hazard) and can cause electric cause electric shock.
shock.
Cleaning Your Micro Component
System
To obtain the best possible results from your micro component sys-
tem, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Compact Disc Player
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
Press PUSH EJECT( ) to open the cassette deck.
2
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
1 2
If you will not be using the remote control for a long time, remove
the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be used
in an excessively dusty environment or subjected to shocks or
extreme heat (close to heating appliances or in direct sunlight,
etc.).
If the unit emits an unpleasant odor when in use, unplug it from
the main supply and contact the after-sales service.
GB
25