Network Setup - Samsung 6 series User Manual

Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
. Connect the 'Samsung Wireless LAN Adapter' into the USB(HDD) or USB terminal of the TV.
The LAN Port on
the Wall
You must use the 'Samsung Wireless LAN Adapter'to use a wireless network.
N
Samsung's Wireless LAN adapter sold separately. The Wireless LAN adapter is offered by select retailers, Ecommerce sites
N
and Samsungparts.com.
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your
N
TV can use a DHCP or static IP address to connect to the wireless network.
Samsung's Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play
N
DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly.
If the wireless IP sharer allows you to turn on / off the Ping connection function, turn it on.
N
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is
N
currently being used by another device nearby, this will result in interference and communications may fail.
If you apply a security system other than the systems listed blow, it will not work with the TV.
N
– When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
– When applying the security key for the Ad-hoc mode, only the following is supported.
1) Authentication Mode : SHARED, WPANONE
2) Encryption Type : WEP, TKIP, AES
If the device isn't certified, it may not connect to TV by the 'Samsung Wireless LAN Adapter'.
N
Network Type
❑
Select Cable or Wireless as the method to connect to the network.
The menu is activated only if the 'Samsung Wireless LAN Adapter' is connected.
N
Cable

Connect to the network using a cable.
Wireless

Connect to the network wirelessly.

Network Setup

❑
Cable Network Setup (when Network Type is set to Cable)

Please check if the LAN cable is connected.
N
● Internet Protocol Setup → Auto Setup / Manual Setup
● Network Test: You can test or confirm the network connection status after setting up the network.
When unable to connect to a wired network
N
If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first
time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to
the Internet as the MAC address differs from that of the device (PC). In this case, ask your Internet service provider about
the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider
requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this
case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case, contact your Internet service provider. If you
cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact
the Samsung Electronics Service Centre.
Wireless IP sharer
LAN Cable
English - 
Samsung Wireless
TV Side Panel
LAN Adapter
or