Maintenance Mode - Xerox DocuPrint 3055 User Manual

[Barcode Mode]
Setting Item
Tray 1
Tray 2 to Tray 4
Bypass Tray

[Maintenance Mode]

The [Maintenance Mode] menu allows you to perform maintenance tasks.
[Reset Counter]
Setting Item
Maintenance Kit
130
5 Control Panel Menus
Printer Settings
Barcode Mode
Sets whether to enable or disable the barcode mode of the tray 1.
• [Off] (default)
• [On]
Sets whether to enable or disable the barcode modes of the trays 2 - 4.
• [Off] (default)
• [On]
Note
• The display only shows the trays that are actually installed on the printer.
Sets whether to enable or disable the barcode mode of the bypass tray.
• [Off] (default)
• [On]
Maintenance Mode
Reset Counter
Resets the counter after you replaced the maintenance kit (regular replace-
ment part). Resetting the counter clears the message prompting you to replace
the maintenance kit.
The maintenance kit includes the following:
• Fuser unit
• Transfer roll
• Feed rolls for the tray 1
• Feed roll and retard roll assy for the bypass tray
Barcode Mode
Tray 1
Barcode Mode
Tray 2
Barcode Mode
Tray 3
Barcode Mode
Tray 4
Barcode Mode
Bypass Tray
Description
Reset Counter
Maintenance Kit
Description