Super Io Configuration - Gigabyte GA-Z77-D3H User Manual

& OnBoard USB3.0 Controller#1 (Etron EJ168 USB3.0 Controller, R_USB30_1 ports on
the back panel)
Enables or disables the Etron EJ168 USB 3.0 controller. (Default: Enabled)
& OnBoard LAN Controller#1
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& PCI Express x4 Slot
Specifies the operating bandwidth for the PCIEX4 slot.
Lets the BIOS automatically configure this setting depending on the expansion card being
Auto
installed. All PCIe x1 and PCI slots will become unavailable when a PCIe x4 expansion
card is installed. (Default)
PCIEX4 operates at x1 mode.
x1
PCIEX4 operates at x4 mode.
x4

` Super IO Configuration

This section provides information on the super I/O chip and allows you to configure the serial port.
& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
` Intel(R) Smart Connect Technology
& ISCT Configuration
Enables or disables Intel Smart Connect Technology. (Default: Disabled)
BIOS Setup - 52 -