Daewoo DWC-055RL Use & Care Manual page 12

FUNCTION
POWER ON
or
POWER
Push POWER button
COOLING MODE
MODE
or
MODE
Push the 'MODE' button until
'COOLING' lamp lights.
Change desired room
temperature
or
TEMP
TEMP
Push the 'TEMP ' button.
Change 'FAN SPEED'
FAN SPEED
FAN
or
SPEED
Push the 'FAN SPEED'
button.
OPERATION
1. The unit starts working.
(It is delayed 3 minutes after main
power source is supplied.)
2. Default mode is 'COOLING' mode.
3. Default desired room temperature is
'26°C' (79°F).
And fan speed is 'Low'.
4. When you tum off the unit with
cooling mode, the Fan still work for
about 10 seconds.
1. Operating modes are changed as
follows by pushing "MODE" button.
(COOLING TURBO FAN
COOLING)
2. The compressor and fan work.
3. In this mode you can change fan
speed and desired temperature at
any time.
4. SLEEP mode and ON/OFF TIMER
can be selected.
(By remocon button only)
1. The desired room temperature is
changed within a range from 16°C
(60°F) to 32°C (90°F) by 1°C (°F)
1. FAN SPEED is changed as follows
by pushing "FAN SPEED" button.
(LOW HIGH LOW)
11
DISPLAY
1. Current room temperature is
displayed.
2. 'COOLING' lamp lights.
ROOM
FAN
TEMP .
DESIRED
TURBO
TEMP .
ENERGY
COOLING
SAVE
1. Current room temperature is
displayed.
2. 'COOLING' lamp lights.
ROOM
FAN
TEMP .
DESIRED
TURBO
TEMP .
ENERGY
COOLING
SAVE
1. It display desired room temperature
when 'TEMP' button is pushed.
2. Desired Temperature is shown as
blinks.
ROOM
FAN
TEMP .
DESIRED
TURBO
TEMP .
ENERGY
COOLING
SAVE
3. After a few seconds, display is
changed to current room
temperature.
1. It displays as follows.
LOW HIGH
2. After a few seconds, display is
changed to current room
temperature.
TEMP
TIMER
TEMP
TIMER
TEMP
TIMER