Teletext - NEC PF28WT100 Instruction Manual

Colour television
Hide thumbs Also See for PF28WT100:
Table of Contents

Advertisement

TELETEXT

- Select the desired program with teletext.
- Press the remote control TELETEXT (
mode. The initial page (or the last page viewed if you have already used
teletext in the present channel) appears.
- Picture And Teletext (PAT) function : If you want to watch the TV program
and use teletext at the same time, press the TELETEXT button (A22)
again. Teletext will be displayed on the left hand part of the screen, and
the whole TV picture will be compressed into right hand part of the
screen.
- To return to TV mode, press again the TELETEXT (
- You can directly enter the 3 figure page number by using the remote control NUMBER 0...9 buttons (A3).
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A6) / DOWN (A21) buttons.
- At the base of the screen a menu of coloured page links is available, showing either page numbers or a title with headings (eg Sport,
News) in RED, GREEN, YELLOW or CYAN colour. These pages can be accessed by using the corresponding coloured buttons (A11,
A12, A26, A25) on the remote control.
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not
immediately available the rolling header will be active until the page arrives.
) button (A22) to select teletext
) button (A22).

Advertisement

Table of Contents
loading

Table of Contents