Factory Default Reset Feature - lrritrol Rain Dial RD-600, RD-900, RD-1200 User Manual

Factory Default Reset Feature

The Rain Dial factory default Program settings are as follows:
Current Time: 12:00 AM.
Current Day: Sunday.
Current Date: January 1, 2006.
Program A: Weekday watering schedule with all days active.
One start time at 7:00 AM.
All stations have 10-minute run time.
Program B and C: No watering days, station run times or start times.
Skip Days and Odd/Even day schedule: OFF - all Programs.
Excluded days in Skip Days or Odd/Even schedule: None.
MV/Pump operation: ON - all stations.
Well Recovery period: 00 (OFF) - all Programs.
MV/Pump operation during Well Recovery: OFF - all Programs.
Water Budget: 100% - all Programs.
Rain Delay: 0 days.
Stack/Overlap: Overlap - 3 Programs or manual stations.
To restore factory default settings:
1. Place the Function switch in the Set Programs position.
2. Place the Program switch to select B.
3. With AC power connected, carefully disconnect the control module
ribbon cable from the PC Board socket.
4. Open the battery compartment and disconnect the battery.
5. Press and hold the Manual
6. Reconnect the ribbon cable, then release the Manual button.
Note: The display should now show 12:00 AM. If it does not,
repeat the procedure as necessary.
7. Reinstall the battery.
8. Reprogram the controller.
button in.
29