Table of Contents
Advertisement
To enable Wi-Fi Direct:
Important! The target device must already be connected to the
same Wi-Fi and have its Wi-Fi Direct feature active
and scanning before you can your pairing.
1. From the main Settings page, tap Connections tab.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status.
3. Tap Wi-Fi Direct.
4. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
Scan and select all the device
5. Tap Done. The direct connection is then established.
Confirm
appears in the Status bar.
6. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
"Connected" and your connected device is listed within
the Wi-Fi Direct devices listing.
7. Each partner (including yourself) must then tap Accept
to consent to the new Wi-Fi Direct pairing.
To enable Share shot on Camera:
1. From the Home screen, tap
(Quick Settings)
2. If you are prompted to activate your Wi-Fi Direct
connection, tap OK and follow the activation
procedures for Wi-Fi Direct.
(Camera)
(Share)
(Share shot).
Multimedia
161
Advertisement
Table of Contents
