Connecting In The Mtp Mode - Sanyo 9.1 Instruction Manual

CONNECTING IN THE MTP MODE

If Windows Vista is your computer's operating system, you can connect your
camera in the MTP mode.
1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera's USB terminal to the computer's USB connector.
2 Turn on the camera (see page 28 in the camera's instruction manual).
h The USB Connection Screen appears on the camera's monitor.
USB CONNECTION
COMPUTER
PRINTER
MOBILE VIEWER
CANCEL
CANCEL OK
3 Select "COMPUTER", and press the SET button.
h The screen to select the computer connection mode appears.
4 Select "MTP", and press the SET button.
To the USB terminal
on the camera
Supplied dedicated
USB interface cable
To USB connector
on the computer
English
24