Led Indicator - Toshiba TOSVERT VF-MB1/S15 IPE002Z Function Manual

For tosvert vf-mb1/s15
Hide thumbs Also See for TOSVERT VF-MB1/S15 IPE002Z:
Table of Contents

Advertisement

2.4. LED indicator

The LED shows the present
status of the network and module.
The behavior of LNK LED
Link Activity
Protocol
Color and behavior
EtherNet/IP
OFF
&
Flashing Green/Red
Modbus TCP
Green ON
Yellow ON
Green Blink
Yellow Blink
The behavior of MS LED
Module Status
Protocol
Color and behavior
OFF
Flashing Green/Red
Green ON
EtherNet/IP
Green flashing
Red flashing
Red on
OFF
Flashing Green/Red
Green ON
Modbus TCP
Green flashing
Red flashing
Red ON
The behavior of NS LED
Network Status
Protocol
Color and behavior
OFF
Flashing Green/Red
Green ON
Green flashing
EtherNet/IP
Red flashing
Red on
OFF
Flashing Green/Red
Green ON
Modbus TCP
Green flashing 3 times
Green flashing 4 times
Green flashing 5 times
MS
LNK
Meaning
No link
Power up testing
Link at 100Mbps
Link at 10Mbps
Activity at 100Mbps
Activity at 10Mbps
Meaning
No power is supplied to the device
Power up testing
The option is operating correctly
The option has not been configured
The option has detected a recoverable minor fault
The option has detected a non-recoverable major fault
The option does not have an IP address or powered off
Power up testing
The option is ready
The option is not ready (waiting for cable connection or etc.)
The option has detected a communication error (err8)
The option has detected a option module error (e-23)
Meaning
The option does not have IP address or powered off
Power up testing
The option has at least one established connection
The option does not have at least one established connection
One or more of the connections in which this device is the target
has time out. This shall be left only if all time out connections are
re-established or if the device is reset
Error: duplicate IP address
The option does not have an IP address or powered off
Power up testing
At least one port is connected and an IP address has been
obtained
All ports are unplugged, but the card has an IP address
Error: duplicate IP address
The card is performing a BOOTP or DHCP sequence
- 6 -
E6581741
NS
LNK

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ethernet/ip modbus ipe002z

Table of Contents