Brake/Tail Light; Brake/Tail Light Replacement; Turn Signal Lights; Bulb Replacement - Triumph Thunderbird Handbook

Maintenance and Adjustment
To remove the position light bulb:
Without pulling on the wires, ease the bulb
holder from its socket. The bulb is removed
from its holder by pulling gently upwards.
1. Headlight bulb
2. Bulb clip
3. Position light bulb
Installation for both bulbs is the reverse of the
removal procedure. Tighten the headlight
clamp to 27 lbf in (3 Nm).
Caution
When reconnecting the battery, connect
the positive (red) lead first.
Warning
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
98

Brake/Tail Light

Brake/Tail Light Replacement

The brake/tail light unit is a sealed,
maintenance free LED unit.

Turn Signal Lights

Bulb Replacement

1. Screwdriver
Use a flat bladed screwdriver to carefully
remove the lens from the indicator to gain
access to the bulb for replacement.