Headlight Bulb Replacement - Triumph Speed Triple Handbook

Headlight Adjustment - Horizontal
1
ccqr
1. Horizontal beam adjusters
The horizontal beams of both headlights can
be adjusted individually. The same procedure
is used to adjust either headlight.
Switch the headlight dipped beam on.
Slacken the headlight bowl fixing.
Adjust the horizontal position of the headlight
to give the required beam setting.
Tighten the clamp bolt to 15 Nm.
Repeat for the second headlight.
Re-check the headlight beam settings.
Switch the headlights off when both beam
settings are satisfactorily set.
Maintenance and Adjustment

Headlight Bulb Replacement

1
2
cbnp
1. Headlight bulb
2. Bulb clip
3. Position lamp bulb
Warning
The bulbs become hot during use. Always
allow sufficient time for the bulbs to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before re-use.
Remove the seat.
Disconnect the battery, negative (black) lead
first.
Undo the fixing securing the headlight clamp
to the headlight body.
Support the headlight while removing the
clamp.
Remove the headlight from its bowl while
supporting it to prevent the cables from
being over-extended.
3
89