Bellco Pachislo Operation Manual

STEP 1 – OPENING THE MAIN DOOR
Unlock and open the front door with the key
provided, by turning the key clockwise (to the
right). On most machines, turning to the left
clears error codes, but does not open the door.
Inspect the interior for any loose wiring harnesses,
caused by shipping.
STEP 2 – GETTING POWER TO
MACHINE
Plug the external AC power cord into a 120 VAC
outlet (standard U.S.A. outlet).
This machine is designed for indoor use and
should not be used outdoors.
STEP 3 – REMOVING AND LOADING
PAYOUT HOPPER
Pachislo Slot Machine Operation Manual
Locate the payout hopper and remove it from the
machine. If the hopper is connected to a wire
harness be sure to disconnect it first. Also, some
machines have a mechanism located at the base
of the hopper to help hold it in place. Press down
to release hopper, then slide hopper out of track.
Loading the Hopper Insert at least 400 tokens
into the top of the hopper, as this will load the
hopper for payoffs.
STEP 4 – TURNING MACHINE ON
Turn the machine power switch (normally located
inside of machine on left side) to the ON position.
The machine will go through a series of test
procedures. When the INSERT MEDAL light
flashes, the machine is ready for play.
On most machines, there will be two slider type
switches on the power supply that are labeled with
Japanese writing. These were for use in the
Japanese casino and have been disabled. These
were used to notify casino personnel that the
machine was either out of coins or the overflow
tray was full. The position of these switches will
not affect the operation of your machine.
1