Bosch GTA3800 Operating/Safety Instructions Manual page 10

BM 2610013406 06-10:BM 2610013406 06-10 6/14/10 9:52 AM Page 10
MoUNTING MITER SAW To STAND
Note: Unfold legs and set saw up in working
position. (See page 6 for instructions.)
1. Locate the tool mount assemblies, place
one (1) anywhere along the length of the
2. Measure the width of the rear mounting
holes of the miter saw, place the other
tool mount on the rail with the same
x
rail, and push the red release lever to the
locked position, as shown in figures I and
J and L.
1
2
distance apart as shown in Figure K and
push the release lever to the locked
position.