Switch Speakerphone On/Off; Making A Call; Answering A Call - Binatone iDECT C5i System User Manual

Switch speakerphone on/off

<
1 During a call, press TALK/SPEAKER
<
2 To switch back to earpiece mode, press TALK/SPEAKER
Note: If you are using the speakerphone, stay close to handset so that the other
party can hear you clearly.

Making a Call

Direct dial
<
1 Press TALK/SPEAKER
@
2 Dial the desired number.
Pre-dial
@
1 Dial the desired number (maximum 24 digits).
If you make a mistake, press BACK/R/C
b
the display.
<
2 Press TALK/SPEAKER
Note: You may need to insert a pause in the number if your phone is connected to a
PBX (for example, after you dial 9 for an outside line, or while waiting for a computer
access tone). Each pause entered will delay the dialling sequence by about 2
seconds.
Press and hold #/PAUSE/RINGER

Answering a call

<
When the phone rings, lift up the handset and press TALK/SPEAKER
<
of the call.
Note: If Auto answer is set to On (see page 21), you can simply lift the
handset off the charging cradle to answer the call without having to
press TALK/SPEAKER
6
icon appears on the display.
You will hear a dial tone.
.
The call timer is displayed after 20 seconds, showing the duration
<
.
<
.
#
to insert a P
<
.
<
.
b
to clear the digits from
in the dialling sequence.
<
again.