Quinta – Safety Instructions Thank you for selecting the digital wireless Quinta conference system. Please take some time to read carefully through this manual before setting up the equipment. Safety Instructions Quinta CU Control Unit / Quinta Charger 1. Read these instructions.
Charger • Use only the CD2 charger or Quinta SC power supply unit to charge the rechargeable batteries integrated in the microphone units. • Never remove the base foam section from the CD2 charger. There are no parts that can be serviced in the interior of the charger.
Quinta CU Control Unit The Quinta CU control unit is the heart of the system. It controls the delegate and chairman microphone units. With one control unit a maxi- mum of 4 speakers (e.g. 3 delegates and 1 chairman) can speak simultaneously. The radio transmission is in the triple band (2.4 / 5.2 / 5.8 GHz frequency band).
• A free line of sight between the Quinta MU microphone units and the antennae of the Quinta CU control unit is essential for the operation of the microphone units. Big obstacles in between can possibly affect the radio transmission. In such specific installations the use of remote antennae can possibly achieve an improvement of the RF situation.
If required, connect the Audio Mix , XLR or Cinch master output of the Quinta CU control unit to the input of a mixing console or amplifier. • If you want to feed the audio signals into a network, connect the AVB connection * to the network by using a CAT5 cable.
Rack Mounting • When mounting the Quinta CU control unit into a 19" rack housing leave 1 U for a ventilation panel above and below the control unit. • Make sure that the mains connection, mains switch and all audio connections on the rear of the device are easily accessible.
3-colour backlit buttons, braille above the buttons and an integrated wideband loudspeaker with equalization. • Each microphone unit is programmed at the factory with an individual worldwide unique device ID so that the Quinta CU control unit can control the microphone units.
Quinta – Microphone Units Quinta MU23 Chairman Microphone Unit Quinta MU22 Double Delegate Microphone Unit Quinta MU21 Delegate Microphone Unit Opening for unlocking the gooseneck microphone Connection for gooseneck microphone Loudspeaker “Clear” button to clear all delegate microphone units Microphone button...
• If you press the standby button of the Quinta CU control unit for more than 3 seconds, you switch off all the active Quinta MU microphone units within the range of the Quinta CU control unit. •...
The different operating modes such as “Normal”, “Push-To-Talk” or “Voice Activation” are adjusted with the Quinta Conference software for all microphone units. The standard operating mode is “Normal”. Please refer also to the appropriate “Quinta Conference Software” or “Quinta Web Server”manual.
• For cleaning the Quinta MU microphone units when they are slightly dirty (finger prints, dust, jam or juice) use a soft, damp cloth, sponge or brush and mild liquid cleaning agent (e.g. washing-up liquid). Do not use any solvent containing cleaners.
First push mutes the port, the next one enables it, third one mutes again etc. If the chairman presses the function button of his/her micro- phone unit, the audio output of the Quinta CU control unit will be muted. The microphone button will flash red (slowly). If...
Quinta – Microphone Units Request-to-Talk Mode Quinta MU22 Double Delegate Microphone Unit • This operating mode is only possible in conjunction with a PC using the Quinta Conference software or a media control system (AMX ® , Crestron ® , Cue etc.).
Classis GM 313 Q, GM 314 Q and GM 315 Q microphones. For microphone units using the Classis GM 316 Q microphone the version Quinta CC 2 / 600 with a higher top cover (Quinta CT 2 / 600) will be available.
LED will illuminate green. Trouble Shooting If problems occur that you do not find listed below, reset the Quinta system to the standard configuration with the Quinta Conference software. Please refer alsoto the appropriate manual. Problem Possible Cause Solution •...
Page 18
• Reduce the distance between control unit of the control unit and microphone units Loudspeaker of the microphone unit does • Check the volume setting with the Quinta • Increase the volume with the Quinta not work Conference Software or Web Server...
7.1.2 Quinta and WLAN or WiFi Like WLAN, the Quinta system uses the same bandwidth of approx. 22 MHz for each RF channel (Low, Mid, High). This results in three compatible RF channels which are theoretically:...
1, 6 and 11 can be used simultaneously. For this reason the WLAN channels 1, 6 and 11 were selected for the RF channels Low, Mid and High used for the Quinta conference system. Due to this frequency compatibility the Quinta system is operated WLAN-friendly.
Charging case for 10 Quinta MU 23/22/21 microphone units with GM 313/314/315 Q, consisting of: Quinta CT 2 top cover, Quinta CD 2 charger, Quinta CW 2 bottom with casters ..... Order # 723.967 Quinta CC 2/600 Charging case for 10 Quinta MU 23/22/21 microphone units with Classis GM 316 Q, consisting of: Quinta CT 2 / 600 top cover, Quinta CD 2 charger, Quinta CW 2 bottom with casters .
Theresienstraße 8, 74072 Heilbronn, Germany Type of Equipment: Wireless Conference System Quinta Model Numbers: Quinta CU I, the undersigned, as an employee of beyerdynamic, hereby declare that the equipment specified conforms to the above Directive and Standards. Manufacturer’s Signature: Date: June, 2012 Full Name:...
Page 25
Type of Equipment: Wireless Conference System Quinta Model Numbers: Quinta MU21, Quinta MU22, Quinta MU23 I, the undersigned, as an employee of beyerdynamic, hereby declare that the equipment specified conforms to the above Directive and Standards. Manufacturer’s Signature: Date: June, 2012...
Need help?
Do you have a question about the Quinta and is the answer not in the manual?
Questions and answers