To Access Via Crossed Cable; To Access Via Base Unit Network; Configuring Clickshare Through The Web Interface - Barco ClickShare Installation Manual

3. Enter the user name 'admin' and the password and click OK.
By default, the password is set to 'admin'.
The web interface opens.
Image 5-3
The ClickShare web interface contains three tab pages: Setup, Maintenance and Help.
If you cannot find the IP address (e.g. there is no screen available) you should connect to the Base Unit
directly with your laptop via an Ethernet crossover cable and access the web interface using the fixed IP
address 192.168.1.23. Make sure your own LAN adapter is set in the 192.168.1. range.
To access the Web Interface via a crossed cable
1. Connect the Base Unit to your laptop using a crossed cable.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.1.23.
A login screen appears.
4. Enter the user name 'admin' and the password and click OK.
By default the password is set to 'admin'.
The web interface opens.
To access the Web Interface via the Base Unit wireless network
1. On your laptop, connect to the Base Unit wireless network.
The default SSID and password to connect to the Base Unit are respectively 'ClickShare-<serial base number>' and 'clickshare'.
2. On your laptop, open a browser.
Note: Supported browsers are Internet Explorer, Firefox and Safari.
3. Browse to http://192.168.2.1.
A login screen appears.
4. Enter the user name 'admin' and the password and click OK.
By default the password is set to 'admin'.
The web interface opens.
5.3.2 Configuring ClickShare through the Web Interface
Setup
On the Setup tab page of the web interface you can add a welcome text to your screen, choose a specific wallpaper, change the
display resolution and adapt some other advanced settings.
Changing the basic settings
On the Basic tab page you can enter the name of the meeting room, add a welcome message and the location that will appear on
the screen. It is also possible to change the language of the web interface.
To change the basic settings
1. Go to the ClickShare web interface.
R5900004 CLICKSHARE 21/08/2012
5. Configuring ClickShare
23