Hp Laserjet Iiisi Printer; Hp Laserjet Iiip Printer - HP PCL 5 Comparison Manual

HP LaserJet IIISi
Printer
Table 2-1. PCL Feature Additions for HP LaserJet IIISi Printer
Feature
Number of Copies
Page Size
Output Bin Selection Command
End Raster Graphics Command
Job Separation
Fonts
HP LaserJet IIIP
Printer
2-2 Printer-Specific Differences
Several new PCL features were added to the PCL 5
language with the release of the HP LaserJet IIISi printer.
These new features are summarized in Table 2-1 below.
Status
Modified
Modified
New
New/Modified
New Command
New Additions
Several new PCL features were added to the PCL 5
language with the release of the HP LaserJet IIIP printer.
These new features are summarized in Table 2-2. One new
feature listed here is adaptive compression (method 5) for
the Raster Compression Mode command. In addition to
compressing data for transmission, if certain rules are
followed (discussed below), the HP LaserJet IIIP printer
will store adaptive compressed data in compressed format
and only decompress it when required for printing. There
are certain requirements which must be met for this data to
be stored in compressed format. These requirements are
discussed following Table 2-2.
Comments
Greater range, 1 to 32,767.
C5 Envelopes not supported.
Allows programmatic selection of upper or lower
output paper bins.
Modified version of the existing End Raster
Graphics command.
Causes the paper stacker to shift positions to
offset the output paper stack.
Four variations of Univers Condensed; ITC Zapf
Dingbats in five symbol sets.