Baby Lock Symphony BLSY Instruction And Reference Manual
  1. Manuals
  2. Brands
  3. Baby Lock Manuals
  4. Sewing Machine
  5. Symphony BLSY
  6. Instruction and reference manual
Baby Lock Symphony BLSY Instruction And Reference Manual

Baby Lock Symphony BLSY Instruction And Reference Manual

Hide thumbs Also See for Symphony BLSY:
Table of Contents

Advertisement

Quick Links

See also: Quick Reference Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Symphony BLSY and is the answer not in the manual?

Questions and answers

Related Manuals for Baby Lock Symphony BLSY

Summary of Contents for Baby Lock Symphony BLSY

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.
  • Page 4 FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY IMPORTANT • In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the mark, rating as marked on plug. • Always replace the fuse cover. Never use plugs with the fuse cover omitted. •...
  • Page 5 1760 Gilsinn Lane Fenton, Missouri 63026 declares that the product Product Name: Baby Lock Sewing Machine Model Number: BLSY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 6 In the event a malfunction occurs or adjustment is required, first follow the troubleshooting table in the back of the instruction and reference guide to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Baby Lock retailer. For additional product information and updates, visit our website at www.babylock.com.

  • Page 7: How To Use This Manual

    HOW TO USE THIS MANUAL Chapters 1 and 2 describe to the first-time user the initial operations for using this machine and the basic sewing operations. To sew utility stitches Continue with chapter 3 to learn how to select a stitch and sew using the various stitches. Chapter 2 Chapter 1 Chapter 3...

  • Page 8: Table Of Contents

    CONTENTS NAMES OF MACHINE PARTS AND THEIR Shell Tuck Stitching ..........81 Scalloping ..............81 FUNCTIONS............9 Top Stitching............. 82 Machine ..............9 Smocking ..............82 Needle and Presser Foot Section ....... 10 Fagoting..............83 Operation Buttons ............ 11 Tape or Elastic Attaching........... 84 Included Accessories ..........
  • Page 9 ERROR MESSAGES ..........133 SPECIFICATIONS ..........136 UPGRADING YOUR MACHINE’S SOFTWARE............137 STITCH SETTING CHART ........139 INDEX..............147...

  • Page 11: Names Of Machine Parts And Their Functions

    NAMES OF MACHINE PARTS AND THEIR FUNCTIONS NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Machine Front View Right-side/Rear View a Handle a Top cover When transporting the machine, carry it by this handle. Open the top cover to thread the machine and wind the bobbin. b Handwheel b Thread guide plate Turn the handwheel toward you to sew one stitch or to raise or...

  • Page 12: Needle And Presser Foot Section

    NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section Measurements on the needle plate, bobbin cover and needle plate cover The measurements on the needle plate and bobbin cover are references for patterns with a middle (center) needle position. The measurements on the needle plate cover is a reference for stitches with a left needle position.

  • Page 13: Operation Buttons

    NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Operation Buttons Included Accessories The accessories are stored in the flat bed attachment. Open the flat bed attachment as shown below. a “Start/Stop” button When this button is pressed, the machine sews a few stitches at a low speed, then begins sewing at the speed set by the sewing speed controller.
  • Page 14 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored) 2.0/11 needle *1 See Instruction and Reference Guide Addendum for detailed instructions.
  • Page 15 NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Part Name Part Code Memo 1 Buttonhole foot “A” X57789-151 2 Overcasting foot “G” XC3098-051 (For U.S.A. only) Foot controller: Model T 3 Monogramming foot “N” X53840-351 This foot controller can be used with this machine 4 Zipper foot “I”...

  • Page 16: Options

    BLG-STS Memo • All specifications are correct at the time of printing. • Please be aware that some specifications may change without notice. Note Visit your authorized Baby Lock retailer for complete listing of optional accessories available for your machine.

  • Page 17: Chapter 1 Getting Ready

    Chapter Getting Ready TURNING THE MACHINE ON/OFF............16 LCD SCREEN..................17 Display Precautions......................17 Key Functions ........................18 Using the Machine Setting Mode Key..............20 Using the Machine Operation Mode Key ..............21 Contents of Each Category ....................21 Using the Pattern Explanation Key ................22 LOWER/UPPER THREADING ..............23 Winding the Bobbin ....................23 Using the Supplemental Spool Pin...................23 Winding the Bobbin Using the Spool Pin.................25...

  • Page 18: Turning The Machine On/Off

    TURNING THE MACHINE ON/OFF TURNING THE MACHINE ON/OFF WARNING • Use only regular household electricity as the power source. Using other power sources may result in fire, electric shock, or damage to the machine. • Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the power supply jack on the machine.

  • Page 19: Lcd Screen

    LCD SCREEN LCD SCREEN Display Precautions • Only touch the display with your finger or the touch pen included with the machine. Do not use a mechanical pencil, screwdriver or any other hard or sharp objects. In addition, do not press the display with extreme pressure, otherwise damage to the display may result.

  • Page 20: Key Functions

    LCD SCREEN Key Functions With your finger or the touch pen, press a key at the top of the display ( ) to change the screen that is displayed. Operation panel Name Function Page Machine setting mode Press this key to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change other machine settings.
  • Page 21 LCD SCREEN Screen Name Function Page Drop feed key For free motion sewing, press this key to lower the feed dogs (free motion sewing 60, 94 mode). In addition, the key automatically appears as and the feed dogs are lowered when button sewing is selected. Screen lock key Press this key to lock the screen.

  • Page 22: Using The Machine Setting Mode Key

    Select one of the 3 display languages: [English], [French], [Spanish] Memo The latest version of software is installed in your machine. Check with your local authorized Baby Lock or our web site (www.babylock.com) for notification of available updates (see page 137).

  • Page 23: Using The Machine Operation Mode Key

    LCD SCREEN Using the Machine Operation Mode Key Basic machine operations and other information based on the contents of this Operation Manual are stored in this machine. Press to open the screen shown below. Six categories are displayed at the top of the screen. Press a key to see more information about that category.

  • Page 24: Using The Pattern Explanation Key

    LCD SCREEN Example: Displaying information about upper Using the Pattern Explanation Key threading Press To learn more about the uses for a stitch, select the Press stitch, and then press to see a description of the → A list of basic operations appears in the lower half of selected stitch.

  • Page 25: Lower/Upper Threading

    LOWER/UPPER THREADING LOWER/UPPER THREADING Set the supplemental spool pin in the “up” Winding the Bobbin position. This section describes how to wind thread onto a bobbin. With this machine, you can use the supplemental spool pin to wind the bobbin while sewing using the main spool pin.
  • Page 26 LOWER/UPPER THREADING While holding the thread from the spool in Slide the bobbin holder to the left until it your right hand, hold the end of the thread snaps into place. with your left hand, and then pass the thread * When the bobbin holder is set to the left, it works as a through the thread guide.

  • Page 27: Winding The Bobbin Using The Spool Pin

    LOWER/UPPER THREADING Winding the Bobbin Using the Spool Pin Slide the spool cap as far as possible onto the spool pin, and then return the spool pin to its The main spool pin cannot be used to wind the original position. bobbin while sewing.

  • Page 28: Setting The Bobbin

    LOWER/UPPER THREADING Lightly hold down the bobbin with your right Setting the Bobbin hand, and then, while slightly pulling the thread with your left hand, guide it through This section describes how to set a bobbin wound with the groove. thread into the machine.

  • Page 29: Upper Threading

    LOWER/UPPER THREADING Guide the bobbin thread through the groove, Upper Threading following the arrow in the illustration. This section describes how to thread the machine and Note the needle. The machine is marked with numbers that • Do not cut the thread with the cutter. indicate the threading order.
  • Page 30 LOWER/UPPER THREADING Press the “Needle Position” button to raise While holding the thread from the spool in the needle. your right hand, hold the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration.
  • Page 31 LOWER/UPPER THREADING Pass the thread through the thread guide disks Release the needle threader lever. (marked “7”). → The thread passes through the eye of the needle. * Make sure that the thread passes through the groove in the thread guide. Carefully pull the end of thread that was * Make sure that the thread securely enters the thread guide disks, otherwise the needle may not be threaded.

  • Page 32: Using The Twin Needle

    LOWER/UPPER THREADING Pass the thread through the needle bar thread Using the Twin Needle guide, and then manually thread the needle on the left side. Using the twin needle, you can sew two parallel lines of * Do not use needle threader when threading a twin needle. the same stitch.
  • Page 33 LOWER/UPPER THREADING While holding the thread from the spool with Press to select the setting for twin both hands, pull the thread through the lower needle sewing. notch in the thread guide plate, then through * The stitch width becomes narrower than with single needle the upper notch.

  • Page 34: Changing The Presser Foot

    CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press in the operation panel before changing the presser foot. If is not pressed and the “Start/Stop” button or another button is pressed, the machine will start and may cause injury. •...

  • Page 35: Changing The Needle

    CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press in the operation panel before changing the needle. If is not pressed and the “Start/ Stop” button or another operation button is pressed accidentally, the machine will start and injury may result. •...
  • Page 36 CHANGING THE NEEDLE Use the included screwdriver to turn the needle clamp screw toward the front of the machine to loosen it, and then remove the needle. Note Do not apply extreme force when loosening or tightening the needle clamp screw, otherwise damage to the machine may result.

  • Page 37: About The Needle

    CHANGING THE NEEDLE About the Needle The sewing machine needle is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles.

  • Page 38: Sewing Large Pieces Of Fabric

    SEWING LARGE PIECES OF FABRIC SEWING LARGE PIECES OF FABRIC Rotate the rubber foot attached to the bottom The extension table makes sewing large pieces of fabric easier. of each leg to adjust the height. Make sure that the extension table is either at the same level or slightly lower than the surface of the needle plate.

  • Page 39: Chapter 2 Sewing Basics

    Chapter Sewing Basics SEWING ....................38 Sewing a Stitch......................38 Using the Foot Controller....................39 Using the Knee Lifter.......................40 Sewing Reinforcement Stitches ................40 Sewing Curves ......................40 Changing Sewing Direction ..................41 Sewing a Seam Allowance of 0.5 cm or Less ..............41 Sewing Heavyweight Fabric ..................41 If the Fabric Does Not Fit under the Presser Foot ............41 If the Fabric Does Not Feed ....................41 Sewing Lightweight Fabric ..................41...

  • Page 40: Sewing

    SEWING SEWING CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. •...

  • Page 41: Using The Foot Controller

    SEWING To stop sewing, press the “Start/Stop” button Using the Foot Controller again. You can also use the foot controller to start and stop sewing. CAUTION • Do not allow fabric pieces and dust to collect in the foot controller. Doing so could cause a fire or an electric shock.

  • Page 42: Sewing Reinforcement Stitches

    SEWING Using the Knee Lifter Sewing Reinforcement Stitches Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free to handle the fabric. Generally stitching must be secured at the beginning and end with reverse/reinforcement stitches. Press the Align the tabs on the knee lifter with the “Reverse/Reinforcement Stitch”...

  • Page 43: Changing Sewing Direction

    SEWING Raise the presser foot lever. Changing Sewing Direction While keeping the black button on the left Stop the machine with the needle in the fabric at the side of presser foot “J” pressed in, lower the point where you want to change the sewing direction, presser foot lever.

  • Page 44: Adjusting Stitch Settings

    ADJUSTING STITCH SETTINGS ADJUSTING STITCH SETTINGS When a stitch is selected, the most appropriate stitch width, stitch length, and upper thread tension are automatically set. However, if needed, you can change any of the settings as described in this section. Note •...

  • Page 45: Adjusting The Thread Tension

    USEFUL FUNCTIONS Upper Thread Is Too Tight Adjusting the Thread Tension If the bobbin thread can be seen on the surface of the fabric, press . Each press of the key reduces The default thread tension, which is automatically set, the setting and decreases the upper thread tension.

  • Page 46: Automatic Thread Cutting

    USEFUL FUNCTIONS Place the fabric under the presser foot with the Press to select the automatic thread needle at the starting point of the stitching, and cutting setting. then press the “Start/Stop” button. The machine will automatically sew reverse stitches (or reinforcement stitches), and then begin sewing.

  • Page 47: Pivoting

    USEFUL FUNCTIONS If the “Reverse/Reinforcement Stitch” button Pivoting is pressed, the machine automatically sews reverse stitches (or reinforcement stitches), If the pivot setting is selected, the machine stops with cuts the thread, then stops. the needle lowered (in the fabric) and the presser foot is automatically raised to an appropriate height when the “Start/Stop”...

  • Page 48: Automatic Fabric Sensor System (Automatic Presser Foot Pressure)

    USEFUL FUNCTIONS Select a stitch. Rotate the fabric, and then press the “Start/ Stop” button. Press to select the pivot setting. → The presser foot is automatically lowered, and sewing continues. Automatic Fabric Sensor System (Automatic Presser Foot Pressure) → The key appears as The thickness of the fabric is automatically detected and the presser foot pressure is automatically adjusted Place the fabric under the presser foot with...

  • Page 49: Locking The Screen

    USEFUL FUNCTIONS Press to display P. 2, and then set the Locking the Screen “AUTOMATIC FABRIC SENSOR SYSTEM” (Automatic Presser Foot Pressure) to “ON”. If the screen is locked before starting to sew, the various settings, such as the stitch width and stitch length, are locked and cannot be changed.
  • Page 50 USEFUL FUNCTIONS...

  • Page 51: Chapter 3 Utility Stitches

    Chapter Utility Stitches SELECTING A UTILITY STITCH ...50 If the Needle Does Not Catch the Fold....80 If the Needle Catches Too Much of the Fold ..80 Appliqués............80 Stitch Selection Screens ........50 Selecting a Stitch ..........51 Sewing Sharp Curves ..........81 Shell Tuck Stitching ..........81 Using the Mirror Image Key .........

  • Page 52: Selecting A Utility Stitch

    SELECTING A UTILITY STITCH SELECTING A UTILITY STITCH Stitch Selection Screens Press to display the previous or next page. Quilting Stitches Straight/Overcasting/Quilting Stitches Heirloom Stitches Decorative Stitches/ Buttonholes/Bar tacks Multi-Directional Sewing...

  • Page 53: Selecting A Stitch

    SELECTING A UTILITY STITCH Selecting a Stitch Saving Stitch Settings This machine is preset with the default settings for the Turn on the machine, and then lightly press stitch width (zigzag width), stitch length, thread tension, the display. automatic thread cutting, automatic reverse/ reinforcement stitching, etc.

  • Page 54: Using The Sewing Type Selection Key

    SELECTING A UTILITY STITCH Using the Sewing Type Selection Key Memo • The next time that the same straight stitch is selected, the stitch length is set to 2.0 mm. • All stitch settings (stitch width, stitch length, thread By pressing , a stitch can also be selected tension, automatic thread cutting, automatic reverse/reinforcement stitching, mirror image, and...
  • Page 55 SELECTING A UTILITY STITCH Example: Displaying information about piecing. Select a stitch. * Press to return to the previous screen. Press → Directions for sewing the selected stitch are → The sewing type selection screen is displayed. displayed. Press Follow the directions to sew the stitch. * Press to scroll the page.

  • Page 56: Sewing The Stitches

    SEWING THE STITCHES SEWING THE STITCHES Quilting You can make beautiful quilts quickly and easily with this machine. When making a quilt, you will find it convenient to use the knee lifter and foot controller to free your hands for other tasks (see “Using the Foot Controller”...
  • Page 57 SEWING THE STITCHES Stitch width Stitch length Presser [mm (inch)] [mm (inch)] Stitch Twin Foot Stitch Name Applications Needle Auto Manual Auto Manual Overcasting stitch Stretch knit seam 0.0 - 7.0 1.0 - 4.0 (3/16) (0 - 1/4) (3/16) (1/16 - 3/16) Attaching tape to seam in stretch Tape attaching 0.0 - 7.0...

  • Page 58: Piecing

    SEWING THE STITCHES Stitch width Stitch length Presser [mm (inch)] [mm (inch)] Stitch Twin Foot Stitch Name Applications Needle Auto Manual Auto Manual Piecing stitch (Left) Piecework/patchwork 0.0 - 7.0 0.2 - 5.0 6.5 mm (approx. 1/4 inch) left (1/16) (0 - 1/4) (1/16) (1/64 - 3/16)

  • Page 59: Quilting With Walking Foot

    SEWING THE STITCHES Use the guide and marks on the presser foot Topstitching quilting, 1/8 inch to sew accurate seam allowances. Sew with the edge of the fabric aligned with the left side of the presser foot end. Piecing a 1/4 inch seam allowance Sew keeping the edge of the fabrics against the guide.

  • Page 60: Using The Quilting Guide

    SEWING THE STITCHES Lower the presser foot lever. Tighten the Presser foot holder screw securely with the screwdriver. Adjust the stem of the quilting guide so that the guide aligns with the seam that has already been sewn. Place one hand on each side of the walking foot to hold the fabric secure while sewing.

  • Page 61: Quilting With Satin Stitches

    SEWING THE STITCHES Check the needle drop point, and then sew Set “WIDTH CONTROL” to “ON”. The along the edge of the appliqué while making sewing speed will be adjusted using the foot sure that the needle drops slightly off the edge controller.

  • Page 62: Free Motion Quilting

    SEWING THE STITCHES Free Motion Quilting Press to lower the feed dogs and to set the machine to free motion sewing mode. For free motion quilting, use free motion quilting foot “C” and free motion open toe quilting foot “O” depending on the stitch that is selected, and set the machine to free motion sewing mode.

  • Page 63: Free Motion Quilting Using Free Motion Open Toe Quilting Foot "O

    SEWING THE STITCHES Use both hands to stretch the fabric taut, and Press to lower the feed dogs and to set then move the fabric at a regular pace in the machine to free motion sewing mode. order to sew uniform stitches roughly 2.0-2.5 mm (approx.

  • Page 64: Echo Quilting

    SEWING THE STITCHES Hold the quilting foot in place with your right Echo Quilting hand, and then tighten the presser foot holder Sewing quilting lines at equal distances around a screw using the screwdriver in your left hand. motif is called echo quilting. The quilting lines, which appear as ripples echoing off the motif, are the distinguishing characteristic of this quilting style.
  • Page 65 SEWING THE STITCHES Press to lower the feed dogs and to set Tighten the screw. the machine to free motion sewing mode. Using the measurement on the quilting foot as a guide, sew around the motif. Select a straight stitch with the middle (center) needle position Follow the steps on page 34 “Removing the Presser Foot”...

  • Page 66: Straight Stitches

    SEWING THE STITCHES Straight Stitches Note When using the twin needle (see page 30), be sure to attach presser foot “J”. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Straight stitch (Left) General sewing, gather, pintuck,...
  • Page 67 SEWING THE STITCHES Select a stitch. At the end of the stitching, hold the “Reverse/ Reinforcement Stitch” button pressed to sew reverse stitches (or reinforcement stitches). Press the “Thread Cutter” button to trim the threads. * If the automatic thread cutting setting is selected before sewing, the machine will automatically sew Attach presser foot “J”.

  • Page 68: Changing The Needle Position (Left Or Middle Needle Position Stitches Only)

    SEWING THE STITCHES Changing the Needle Position (Left or Needle Plate and Needle Plate Cover Marks Middle Needle Position Stitches Only) For a standard 16 mm (approx. 5/8 inch) seam allowance, set the width to 3.5 mm on the screen. When you select left or middle (center) needle While sewing, align the edge of the fabric with the position stitches, you can use...

  • Page 69: Aligning The Fabric With The Stitch Guide Foot

    SEWING THE STITCHES Sew while lightly guiding the fabric. Insert the thumbscrew on the seam guide into the screw hole to the right of the needle plate. Memo This is easy to do if the foot controller is used a Screw hole for seam guide (see page 39).

  • Page 70: Using The Straight Stitch Needle Plate And The Straight Stitch Foot

    SEWING THE STITCHES Using the Straight Stitch Needle Plate and Use the disc-shaped screwdriver included with the machine to unscrew and remove the the Straight Stitch Foot regular needle plate. The straight stitch needle plate and the straight stitch foot can only be used for straight stitches (middle (center) needle position stitches).

  • Page 71: Darts Seams

    SEWING THE STITCHES After reinstalling the needle plate cover, Darts Seams select one of the following straight stitches. Press , and then attach presser foot “J”. Press the “Reverse/Reinforcement Stitch” button to sew reverse stitches at the beginning of the stitching, and then sew from the wide end to the narrow end without stretching the fabric.

  • Page 72: Gathering

    SEWING THE STITCHES Pull the bobbin threads to create the desired Gathering amount of gathering, and then tie the threads. Sew gathers on sleeves, the waist of a gathered skirt, etc. Select a straight stitch, and then attach presser foot “J”. Smooth the gathers by ironing them.

  • Page 73: Pintucks

    SEWING THE STITCHES Lay both seam allowances on the side of the Pintucks shorter one (cut seam allowance) and iron them flat. Use pin tucks to decorate blouses. Mark the positions of the folds on the wrong side of the fabric. a Wrong side of fabric Fold the longer seam allowance around the shorter one, and then sew along the edge of...

  • Page 74: Zigzag Stitches

    SEWING THE STITCHES Zigzag Stitches Zigzag stitches are useful for a variety of applications, including overcasting and sewing appliqués and patchwork. Note When using the twin needle (see page 30), be sure to attach presser foot “J”. Stitch width Stitch length Stitch Presser Twin...

  • Page 75: Patchwork (Crazy Quilts)

    SEWING THE STITCHES Patchwork (Crazy Quilts) Snap the cord guide bobbin cover into place, making sure that the gimp thread can be fed Turn back the desired width of seam allowance, freely. place it over a different piece of fabric, and then sew the two fabric pieces together so the stitching * Make sure there are no restrictions when feeding the bridges both pieces.

  • Page 76: Elastic Zigzag Stitches

    SEWING THE STITCHES Elastic Zigzag Stitches Use elastic zigzag stitches for a wide variety of applications, including overcasting, tape attaching, and darning. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual 2 step elastic zigzag...

  • Page 77: Overcasting

    SEWING THE STITCHES Overcasting Sew overcasting at the beginning and end of seams for skirts or pants, and at the beginning and end of all cuttings. Depending on the selected stitch, use presser foot “G” or “J” or the optional side cutter attachment. Overcasting Using Presser Foot “G”...

  • Page 78: Overcasting Using Presser Foot "J

    SEWING THE STITCHES Overcasting Using Presser Foot “J” Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Overcasting stitch Reinforced seaming of stretch 0.0 - 7.0 0.5 - 4.0 fabric (3/16) (0 - 1/4)

  • Page 79: Overcasting Using The Optional Side Cutter

    SEWING THE STITCHES Overcasting Using the Optional Side Cutter By using the side cutter, you can do overcasting while cutting the fabric. CAUTION • Make sure to only select one of the stitches listed below. Using another stitch may cause the needle to hit the presser foot and break, possibly causing injury.

  • Page 80: When Sewing Straight Stitches While Using The Optional Side Cutter

    SEWING THE STITCHES Select a stitch. Start sewing. → A seam allowance is cut while the stitching is sewn. Note If the width has been adjusted, turn the handwheel by hand to check that the needle does not touch the side cutter.

  • Page 81: Blind Hem Stitches

    SEWING THE STITCHES Blind Hem Stitches Select a blind hem stitch to sew the hems or cuffs of dresses, blouses, pants, or skirts. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual...

  • Page 82: Appliqués

    SEWING THE STITCHES Remove the basting, and then turn over the Appliqués fabric. Use a temporary spray adhesive or basting to attach the appliqué to the fabric. a Wrong side of fabric b Surface of fabric Memo a Appliqué Blind hem stitches cannot be sewn if the needle does b Fabric glue not catch the fold on the left side.

  • Page 83: Shell Tuck Stitching

    SEWING THE STITCHES Sewing Sharp Curves Attach presser foot “J”, and then sew along the edge of the fabric, making sure that the Stop the machine with the needle in the fabric needle drops slightly off the edge. outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam.

  • Page 84: Top Stitching

    SEWING THE STITCHES Leave a seam when sewing the scallop Turn the fabric over so the right side faces up, stitches so that the pattern is not sewn and then sew over the seam with the center of directly on the edge of the fabric. the presser foot aligned with the seam.

  • Page 85: Fagoting

    SEWING THE STITCHES Pull the bobbin threads to create the desired Fagoting amount of gather, and then smooth the gathers by ironing them. Stitching across an open seam is called fagoting. It is used on blouses and children’s clothing. Separate the two pieces of fabric by about 4 mm (approx.

  • Page 86: Tape Or Elastic Attaching

    SEWING THE STITCHES Press Tape or Elastic Attaching Memo Elastic tape is sewn onto the fabric unstretched. For details on the stitches, refer to “Stitch Setting Select a straight stitch, and then attach Chart” at the end of this manual. presser foot “J”.

  • Page 87: Heirloom Stitching

    SEWING THE STITCHES Select a stitch, attach presser foot “N”, and Heirloom Stitching then start sewing. * Select a stitch between 3-01 and 3-22. By sewing with a wing needle sold separately, the Drawn Work (1 needle holes are enlarged, creating a lace-like decorative stitch.

  • Page 88: Hemstitching (3) (Drawn Work (2))

    SEWING THE STITCHES Press , and then attach presser foot “N”. Pull out several threads from both sides of a 4 mm (approx. 3/16 inch) area left unopened, as shown in the illustration. Memo For details on the stitches, refer to the “STITCH SETTING CHART”...

  • Page 89: Buttonhole Stitches

    SEWING THE STITCHES Buttonhole Stitches Select the desired buttonhole stitch according to your application and the size of the button. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Narrow rounded Buttonhole on light to medium 3.0 - 5.0...
  • Page 90 SEWING THE STITCHES Select a stitch, and then attach presser foot Hold the outside frame of the buttonhole foot “A”. toward the back with your finger, and then lower the presser foot so that the mark on the Mark the position and length of the fabric aligns with the marks on the buttonhole buttonhole on the fabric.
  • Page 91 SEWING THE STITCHES Gently hold the end of the upper thread, and Insert a pin along the inside of a bar tack at then start sewing. the end of the buttonhole, and then insert the seam ripper into the center of the buttonhole * Once sewing is completed, the machine and cut towards the pin.

  • Page 92: Sewing Stretch Fabrics

    SEWING THE STITCHES Sewing Stretch Fabrics Buttons That Do Not Fit into the Button Holder Plate When sewing a buttonhole on stretch fabrics, press Use the markings on the presser foot scale to set the , and use a gimp thread. size of the buttonhole.

  • Page 93: Darning

    SEWING THE STITCHES Darning Use darning stitches for mending and other applications. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Darning Darning of medium weight fabric 2.5 - 7.0 0.4 - 2.5 (1/4) (3/32 - 1/4)

  • Page 94: Bar Tacks

    SEWING THE STITCHES Pull down the buttonhole lever. Gently hold the end of the upper thread, and then start sewing. * The buttonhole lever should be positioned behind the metal bracket on the buttonhole foot, as shown * Once sewing is completed, the machine in the illustration.

  • Page 95: Bar Tacks On Thick Fabrics

    SEWING THE STITCHES Position the fabric so that the opening of the Gently hold the end of the upper thread, and pocket moves toward you during sewing. then start sewing. Hold the outside frame of the buttonhole foot * Once sewing is completed, the machine toward the back with your finger, check the automatically sews reinforcement stitches, then first needle drop point, and then lower the...

  • Page 96: Button Sewing

    SEWING THE STITCHES Button Sewing Buttons with 2 or 4 holes can be sewn on. Note Make sure that the automatic thread cutting setting is not selected when sewing on buttons. Stitch width Stitch length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications...

  • Page 97: Eyelets

    SEWING THE STITCHES Attaching a 4-Hole Button When sewing is finished, pull the two ends of the upper thread between the button and the Sew the two holes toward the front. Then, raise the fabric, wind them around the shank, and then presser foot, move the fabric so that the needle goes tie them together.

  • Page 98: Multi-Directional Sewing (Straight Stitch And Zigzag Stitch)

    SEWING THE STITCHES Use the eyelet punch to cut a hole in the Press , and then attach presser foot “N”. center of the stitching. Multi-Directional Sewing (Straight Stitch and Zigzag Stitch) Memo Use these stitches to attach patches or emblems to pant For details on the stitches, refer to the “STITCH legs, shirt sleeves, etc.

  • Page 99: Zipper Insertion

    SEWING THE STITCHES Press , and then sew seam 4. Zipper Insertion * The fabric will move sideways, so guide the fabric with your hands to sew straight. Centered Zipper Use for bags and other such applications. Press * Be sure to select the straight stitch with the middle (center) needle position.

  • Page 100: Side Zipper

    SEWING THE STITCHES Remove presser foot “J”, and then attach the Side Zipper pin on the right side of zipper foot “I” to the Use for side zippers on skirts or dresses. presser foot holder. Press * Be sure to select the straight stitch with the middle (center) needle position.
  • Page 101 SEWING THE STITCHES Remove presser foot “J”, and then attach the Close the zipper, turn the fabric over so that presser foot holder to the pin on the right side the surface faces up, and then baste the other of zipper foot “I”. side of the zipper to the fabric.
  • Page 102 SEWING THE STITCHES...

  • Page 103: Chapter 4 Character/Decorative Stitches

    Chapter Character/ Decorative Stitches SELECTING STITCH PATTERNS............102 Stitch Selection Screens ......................102 Selecting Decorative Stitch Patterns/7 mm Decorative Stitch Patterns/Satin Stitch Patterns/ 7 mm Satin Stitch Patterns/Cross Stitch Patterns/Utility Decorative Stitch Patterns ....103 Alphabet Patterns.........................103 SEWING STITCH PATTERNS .............105 Sewing Attractive Finishes....................105 Basic Sewing ........................105 Adjusting Patterns ........................106 EDITING STITCH PATTERNS.............108...

  • Page 104: Selecting Stitch Patterns

    SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS Stitch Selection Screens Press to display the screen shown below. a Decorative stitch patterns b 7 mm decorative stitch patterns c Satin stitch patterns d 7 mm satin stitch patterns e Cross stitch patterns f Utility decorative stitch patterns g Alphabet patterns (gothic font) h Alphabet patterns (handwriting font)

  • Page 105: Selecting Decorative Stitch Patterns

    SELECTING STITCH PATTERNS To combine patterns, select the next pattern. Selecting Decorative Stitch Patterns/ * Press to check the selected pattern 7 mm Decorative Stitch Patterns/ combination. Satin Stitch Patterns/ * If the wrong pattern was selected, press 7 mm Satin Stitch Patterns/Cross erase the pattern, and then select the new stitch pattern.
  • Page 106 SELECTING STITCH PATTERNS Press Press to display a selection screen of characters, and then select a character. Repeat this step until you have selected all of the characters. * If a wrong character was selected, press to erase the character, and then select the new character. * To select a different character style, press and then select the new character style.

  • Page 107: Sewing Stitch Patterns

    SEWING STITCH PATTERNS SEWING STITCH PATTERNS Sewing Attractive Finishes Note • To achieve the best results when sewing character/decorative stitches, check the table below for the proper fabric/ needle/thread combinations. • Other factors, such as the type or thickness of the fabric being sewn or the type of stabilizer material used, also affect the stitching.

  • Page 108: Adjusting Patterns

    SEWING STITCH PATTERNS Press the “Start/Stop” button to stop the Adjusting Patterns machine, and then press the “Reverse/ Reinforcement Stitch” button to sew Depending on the type and thickness of the fabric being reinforcement stitches. sewn, the sewing speed, whether or not stabilizer material is used, etc., the desired result may not be achieved.
  • Page 109 SEWING STITCH PATTERNS Press Sew the pattern again. If the pattern still is not sewn correctly, adjust it again. Continue making adjustments until the pattern is sewn correctly. Memo You can sew with the settings screen on the display. After the pattern is sewn correctly, quit making adjustments.

  • Page 110: Editing Stitch Patterns

    EDITING STITCH PATTERNS EDITING STITCH PATTERNS Using the editing functions, you can change the patterns in a variety of ways, such as resizing them or flipping them to create a mirror image. Memo Depending on the pattern that is selected, some editing functions may not be available. Key Functions Name Function...

  • Page 111: Changing The Pattern Size

    EDITING STITCH PATTERNS Changing the Pattern Size Creating a Vertical Mirror Image After selecting a stitch pattern, press until the After selecting a stitch pattern, press to flip the desired size is selected. pattern vertically. Memo • Stitch patterns entered after the pattern size was changed are added at the selected size until it is changed again.

  • Page 112: Selecting A Single/Repeating Pattern

    EDITING STITCH PATTERNS Selecting a Single/Repeating Pattern Changing the Thread Density (Satin Stitch Patterns Only) Press to select whether the pattern is sewn repeatedly or once. After selecting a stitch pattern, press until the desired stitching density is selected. Memo CAUTION If you press while sewing, the key changes to...

  • Page 113: Returning To The Beginning Of The Pattern

    EDITING STITCH PATTERNS Returning to the Beginning of the Pattern When sewing character/decorative stitches, you can return to the beginning of the pattern after trial sewing or when the stitching is sewn incorrectly. Memo This function is not available for the sititches in the category.

  • Page 114: Combining Stitch Patterns

    COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS You can combine many varieties of stitch patterns, such as character stitches, cross stitches, or satin stitches. You can also combine stitch patterns of different sizes, mirror image stitch patterns, and others. Before Combining Patterns Note •...
  • Page 115 COMBINING STITCH PATTERNS Press Memo • Press to erase the last pattern entered. Patterns are erased one at a time. • If the entire combined pattern cannot be displayed, press to view an image of the pattern. Press to return to the previous screen. Press →...

  • Page 116: Combining Stitch Patterns Of Different Sizes

    COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Press again, and then press so that it Sizes appears as Example: Press → The second pattern is displayed in the smaller size. To repeatedly sew the pattern combination, press so that it appears as Press →...

  • Page 117: Combining Stitch Patterns Of Different Orientations

    COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Press again, and then press so that it Orientations appears as Example: Press → The second pattern is flipped horizontally. To repeatedly sew the pattern combination, press so that it appears as Press →...

  • Page 118: Combining Stitch Patterns Of Different Lengths

    COMBINING STITCH PATTERNS Press again, and then press three Combining Stitch Patterns of Different Lengths times so that it appears as Press → The second pattern is displayed with a length of 2. To repeatedly sew the pattern combination, press so that it appears as Press , and then press...

  • Page 119: Creating Step Patterns (7 Mm Satin Stitch Patterns Only)

    COMBINING STITCH PATTERNS Press , and then press Creating Step Patterns (7 mm Satin Stitch Patterns Only) Stitch patterns that are shifted to create a step-shaped pattern are called step patterns. Step patterns can be created by using shift 7 mm satin stitch patterns. Press once to move the stitch pattern to the left by half the width of the stitch pattern.

  • Page 120: Examples Of Pattern Combinations

    COMBINING STITCH PATTERNS Examples of Pattern Combinations → → → → → → → → → → → → → → → → → → → → → → →...

  • Page 121: Using The Memory Function

    USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Stitch Data Precautions Saving Stitch Patterns in the Machine’s Memory Observe the following precautions when using stitch data other than that created and saved in this machine. You can save often-used stitch patterns in the machine’s Types of Stitch Data That Can Be Used memory.

  • Page 122: If The Memory Is Full

    USING THE MEMORY FUNCTION Select a stitch pattern to be deleted. Press * Press to display the next page. * Press to return to the previous screen without saving the stitch pattern. * Only the first entry of each stitch pattern is displayed in the memory.

  • Page 123: Saving Stitch Patterns To The Computer

    USING THE MEMORY FUNCTION Press Plug the USB cable connectors into the corresponding USB ports on the computer * If you decide not to delete the stitch pattern, press and on the machine. * The USB cable can be plugged into the USB ports on the computer and machine whether or not they are turned on.

  • Page 124: Retrieving Stitch Patterns From The Machine's Memory

    USING THE MEMORY FUNCTION Press Retrieving Stitch Patterns from the * Press to return to the previous screen Machine’s Memory without saving the stitch pattern. Press → The stitch pattern is temporarily saved to “Removable Disk” under “My Computer”. → The pocket selection screen appears. Select the stitch pattern’s .pmu file in “Removable Disk”, and copy the file to the Select a stitch pattern to be retrieved.

  • Page 125: Retrieving Stitch Patterns From The Computer

    USING THE MEMORY FUNCTION Move/copy the pattern data to “Removable Press Disk”. * Press to delete the stitch pattern. Memo A maximum of 24 stitch patterns or 476 KB can be moved or copied to “Removable Disk”. → The selected stitch pattern is retrieved and the →...
  • Page 126 USING THE MEMORY FUNCTION Select a stitch pattern to be retrieved. * Press to view the entire stitch pattern. CAUTION * Press to return to the previous screen • When disconnecting the USB cable: without retrieving the stitch pattern. Before disconnecting the USB cable, click the “Unplug or Eject Hardware”...

  • Page 127: Chapter 5 Appendix

    Chapter Appendix CARE AND MAINTENANCE ..............126 Cleaning the LCD ....................126 Cleaning the Machine Casing ................126 Cleaning the Race ....................126 Cleaning the Bobbin Case ..................127 ADJUSTING THE SCREEN ..............128 Screen Visibility Is Low ..................128 Touch Panel Is Malfunctioning ................128 TROUBLESHOOTING ...............130 ERROR MESSAGES................133 Alarm ..........................135 SPECIFICATIONS................136...

  • Page 128: Care And Maintenance

    CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Grasp the bobbin case, and then pull it out. Cleaning the LCD If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth.

  • Page 129: Cleaning The Bobbin Case

    • For a new bobbin case (part code: XC3153-351 cover assuring the bobbin case projection (black), part code: XE8298-001 (gray)), contact your (stopper) is touching the bracket spring. nearest authorized Baby Lock retailer. • Be sure that the bobbin case is correctly installed. Otherwise, the needle may break.

  • Page 130: Adjusting The Screen

    ADJUSTING THE SCREEN ADJUSTING THE SCREEN Screen Visibility Is Low Touch Panel Is Malfunctioning If the screen is difficult to read when the machine is If the screen does not respond correctly when a key is turned on, follow the procedure described below. pressed (the machine does not perform the operation or performs a different operation), follow the procedure Turn off the machine, hold your finger...
  • Page 131 ADJUSTING THE SCREEN Using the included touch pen, lightly touch × the center of each , in order from 1 to 5. * If the buzzer sounds one time after you press number 5, the operation is finished, and “SUCCESS” appears on the screen.

  • Page 132: Troubleshooting

    TROUBLESHOOTING If you have a minor problem with your sewing machine, check the following solutions. If the solutions suggested do not correct the problem, contact your authorized Baby Lock retailer. Memo This machine is equipped with a simple troubleshooting feature that can be used in case minor problems occur during sewing.
  • Page 133 TROUBLESHOOTING Problem Cause Solution Page High-pitched sound while Dust or lint is caught in the feed dogs. Remove the dust or lint. sewing Pieces of thread are caught in the race (bobbin Clean the race (bobbin case). case). The upper threading is incorrect. Check the procedure for threading the machine and rethread it correctly.
  • Page 134 TROUBLESHOOTING CAUTION • This machine is equipped with a thread detection device. If the “Start/Stop” button is pushed before the upper threading is done, the machine will not operate properly. Also, depending on the pattern selected, the machine may feed the fabric even if the needle is raised. This is due to the needle bar release mechanism. At these times, the machine will make a sound different from that made during normal sewing.

  • Page 135: Error Messages

    ERROR MESSAGES ERROR MESSAGES If the “Start/Stop button” or the “Reverse/Reinforcement Stitch” button is pressed before the machine is correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with an alarm and an error message.
  • Page 136 ERROR MESSAGES This message is displayed when This message is displayed when the bobbin thread is running out. is pressed while the presser foot is raised. This message is displayed when This message is displayed when the bobbin is being wound, and the motor locks because the thread is tangled, etc.

  • Page 137: Alarm

    ERROR MESSAGES This message is displayed when the machine is set for twin needle sewing and a pattern that cannot be sewn with the twin needle is selected. This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed.

  • Page 138: Specifications

    SPECIFICATIONS SPECIFICATIONS Item Specification 51.1 cm (W) × 30.5 cm (H) × 25.8 cm (D) (approx. 20-1/8 inches Sewing Machine Dimensions (W) × 12 inches (H) × 10-1/8 inches (D)) 58.2 cm (W) × 31.9 cm (H) × 28.4 cm (D) (approx. 22-7/8 inches Case dimensions (W) ×...

  • Page 139: Upgrading Your Machine'ssoftware

    UPGRADING YOUR MACHINE’S SOFTWARE UPGRADING YOUR MACHINE’S SOFTWARE You can use a computer to download software upgrades for your sewing machine. When an upgrade program is available on www.babylock.com, please download the files following the instructions on the web site and steps below. Note There are two upgrade files.
  • Page 140 UPGRADING YOUR MACHINE’S SOFTWARE When the following screen appears, upgrading is completed. Press LOAD after saving the upgrade file in the machine. Upgrade complete. Note If an error occurred, an error message appears. At this time, turn the machine off, and then start the procedure again from step Disconnect the USB cable, and turn the machine off, then on again.

  • Page 141: Stitch Setting Chart

    STITCH SETTING CHART STITCH SETTING CHART Note When using the twin needle (see page 30), be sure to attach presser foot “J”. Presser Stitch Width Stitch Length Stitch Twin Foot [mm (inch)] [mm (inch)] Stitch Name Applications Needle Auto Manual Auto Manual Piecing stitch (Middle)
  • Page 142 STITCH SETTING CHART Presser Stitch Width Stitch Length Stitch Twin Foot [mm (inch)] [mm (inch)] Stitch Name Applications Needle Auto Manual Auto Manual Overcasting stitch Stretch knit seam 0.0 - 7.0 1.0 - 4.0 (3/16) (0 - 1/4) (3/16) (1/16 - 3/16) Tape attaching Attaching tape to seam in 0.0 - 7.0...
  • Page 143 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Straight stitch (Left) General sewing, gather, pintuck, etc. Reverse stitch is 0.0 - 7.0 0.2 - 5.0 sewn while pressing “Reverse/ (0 - 1/4) (3/32)
  • Page 144 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Overcasting stitch Reinforcing of medium stretch 0.0 - 7.0 0.5 - 4.0 fabric and heavyweight fabric, (3/16) (0 - 1/4) (3/32) (1/32 - 3/16)
  • Page 145 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Blind hem stitch Hemming woven fabrics 1.0 - 3.5 3← − →3 (1/16) (1/16 - 1/8) Blind hem stitch Hemming stretch fabric 1.0 - 3.5 3←...
  • Page 146 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Hemstitching Decorative hems, triple straight 1.0 - 7.0 1.5 - 4.0 at left (1/16) (1/16 - 1/4) (3/32) (1/16 - 3/16) Hemstitching...
  • Page 147 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Hemstitching Decorative hems. Fagoting, 1.5 - 7.0 1.5 - 4.0 attaching ribbon (3/16) (1/16 - 1/4) (1/8) (1/16 - 3/16) Hemstitching Decorative hems, smocking...
  • Page 148 STITCH SETTING CHART Stitch Width Stitch Length Stitch Presser Twin [mm (inch)] [mm (inch)] Stitch Name Applications Foot Needle Auto Manual Auto Manual Eyelet For making eyelets, holes on 7.0 6.0 5.0 7.0 6.0 5.0 belts, etc. (1/4 15/64 3/ (1/4) (1/4 15/64 3/16) (1/4)

  • Page 149: Index

    INDEX INDEX Numerics elongation key ................109 error messages ................133 1/4" quilting foot with guide ............56 extension table ................36 eyelets ..................95 accessories ..................11 air vent ...................9 fabrics alarm ..................135 fabric/thread/needle combinations ..........35 alphabet patterns sewing heavyweight fabric ............41 character/decorative stitches ...........103 sewing lightweight fabric ............
  • Page 150 INDEX needle position ................66 start/stop button ..............11 needle position button ..............11 step patterns ................117 needle threader lever ............... 9 stitch guide foot ................67 stitch length ..................42 stitch width ...................42 stitching density ................110 open toe foot ................. 58 straight stitch .................64 operation buttons ..............
  • Page 152 English 882-U65 XE8666-001 Printed in Taiwan...

Table of Contents