Table of Contents
Advertisement
Instructions for use
GB
English, 1
WML 720 P/G/A/K
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Wash cycles, 8
Table of wash cycles
Cutting off the water or electricity supply
Troubleshooting, 13
Assistance, 14
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint WML 720 P
Summary of Contents for Hotpoint WML 720 P
-
Page 1: Table Of Contents
Indicator lights Starting a wash cycle Wash cycles, 8 Table of wash cycles Personalisation, 9 Setting the temperature WML 720 P/G/A/K Setting the spin speed Functions Detergents and laundry, 10 Detergent dispenser drawer Preparing the laundry Garments requiring special care... -
Page 2: Unpacking And Levelling
Installation 2. If the floor is not perfectly level, compensate for any Keep this instruction manual in a safe place for future unevenness by tightening or loosening the adjustable reference. Should the appliance be sold, transferred or front feet (see figure); the angle of inclination, measu- moved, make sure the instruction manual accompanies the red according to the worktop, must not exceed 2°. -
Page 3: Electric Connection
Connecting the drain hose • the supply voltage is included within the values indica ted on the Technical details table (see page 5); Connect the drain hose, without bending it, to a • the socket is compatible with the washing machine’ s draining duct or a wall plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not corre- The first wash cycle spond with the coloured markings identifyng the termi- nals in your plug, proceed as follows: Once the appliance has been installed, and before you Connect Green &... -
Page 5: Technical Data
Technical data Model WML 720 P/G/A/K width 59.5 cm Dimensions height 85 cm depth 53,5 cm Capacity from 1 to 7 kg Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water connections minimum pressure 0.05 MPa (0.5 bar) -
Page 6: Description Of The Washing Machine And Starting A Wash Cycle
Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights SPIN SPEED knob DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE Detergent dispenser drawer button with FUNCTION indicator light buttons with WASH CYCLE indicator lights knob Detergent dispenser drawer: used to dispense de-... -
Page 7: Indicator Lights
Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any The indicator lights provide important information. damage, wait for the indicator light to switch off before you This is what they can tell you: open the appliance door. -
Page 8: Wash Cycles
Wash cycles Table of wash cycles Max. Max. Detergents load load Cycle duration Max. Max. (kg) (kg) Description of the wash cycle temp. speed (°C) (rpm) Fabric Mini Mini Wash Normal Normal softener load load Essentials cycles Cottons: extremely soiled whites. 90°... -
Page 9: Personalisation
Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. -
Page 10: Detergents And Laundry
Lingerie cycle: for undergarments of any colour, in any fabric. Use special wash cycle 8. Wool: Hotpoint is the only washing machine manufac- turer to have been awarded the prestigious Woolmark Do not pour detergent into the middle compartment Platinum Care endorsement (M.0508) by the Woolmark... -
Page 11: Precautions And Tips
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The In the event that it is not possible to open the porthole following information is provided for safety reasons and door due to a powercut, and if you wish to remove the must therefore be read carefully. -
Page 12: Care And Maintenance
Care and maintenance Cutting off the water and electricity supplies Cleaning the pump • Turn off the water tap after every wash cycle. This will The washing machine is fitted with a self-cleaning pump limit wear on the hydraulic system inside the washing which does not require any maintenance. -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not switch •... -
Page 14: Assistance
DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 15: After Sales Service
After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. - Page 16 195077186.00 03/2009 - Xerox Fabriano...
Need help?
Do you have a question about the WML 720 P and is the answer not in the manual?
Questions and answers