Firmware Update; Download The Latest Firmware File And Set Up Tftp Server - ATCOM IPPBX IP08 Product Manual

Hide thumbs Also See for IPPBX IP08:

Table of Contents

following steps:

After click on OptionsAdvanced OptionsShow Advanced Options, please select Network

Settings option from the vertical menu on the left of main page, the following screen is where you

configure the network:

In the drop-down list of DHCP, you can see the following three options:

1. DHCP: yes: IP08 will obtain the dynamic IP address from your router.

2. DHCP: auto: IP08 will use the static IP specified below and ping the default gateway. When

there is no response from the default gateway, the IP-08 will switch to dynamically obtain the

IP address from your router.

3. DHCP: no: IP08 will use the static IP address set below.

If you want to get static and permanent IP address, please do not select "yes", after configure other

parameters, please click "save" in the bottom of your page to save your setting.

3.26 Firmware Update

You can update to the latest version for IP08 by TFTP.

1) Download the md5 file from

http://www.atcom.cn/downloads/index.php?folder=SVBQQlgvZmlybXdhcmU=, then put it in

your TFTP server root directory.

2) Run your TFTP server, and I set up it like the following:

www.atcom.cn

Table of Contents

Do you have a question about the IPPBX IP08 and is the answer not in the manual?