POSIFLEX KB-6600 Series User Manual

POSIFLEX KB-6600 Series User Manual

Programmable keyboard
Hide thumbs Also See for KB-6600 Series:

Advertisement

KB-6600/KB-6600U Series
Programmable Keyboard
User's Manual
Rev. A1
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty will terminate automatically when the machine is opened by any person other
than the authorized technicians. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
This manual is written in an attempt with full strength to assist the user to utilize
the powerful programmable keyboard KB-6600 series which consists of a 6 positioned
electronic control key and 84 press keys which provides excellent tactile click when
pressed, and an optional magnetic stripe reader for ISO standards. The KB-6600 not
only is capable of being programmed to transmit whatever code a standard PC or PS2
keyboard can deliver, but also provides a great variety of programmability such that
contains all capabilities of the most modern programmable keyboards.
The manufacturer of this product heartily apologizes to the user for reserving the right
to change or to modify this manual without notice due to the rapid and constant
progress and improvement on science and technology.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com
or
http://www.posiflex.com.tw
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2006
All brand and product names and trademarks are the property of their
respective holders.
P/N: 19170900020
Part 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KB-6600 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX KB-6600 Series

  • Page 1 This manual is written in an attempt with full strength to assist the user to utilize the powerful programmable keyboard KB-6600 series which consists of a 6 positioned electronic control key and 84 press keys which provides excellent tactile click when pressed, and an optional magnetic stripe reader for ISO standards.
  • Page 2: Package Contents

    OVERVIEW SCOPE The KB-6600 series is a series of powerful programmable keyboard suitable for application in PC compatible system, programmable without TSR under DOS, Win98/2000, Win XP embedded and Win XP Pro environment. This series provides 84 keys (max.) of a comfortable size 19 x 19 mm in 6 x 15...
  • Page 3: Installation

    A. OPTION LIST MSR (ISO track 1 & 2, ISO track 1, 2 & 3, or JIS I / II) /pc Double key with key cap / set Blank key / pc Single key top and key cap / set III.
  • Page 4: Keytop Layout

    Monitor PS2 KB or USB KB USB Cable: 21863150800 KB-6600U Fig.3-2 KEYTOP LAYOUT The basic layout of this programmable keyboard is a matrix with 6 rows and 15 columns to provide maximum 84 positions for push keys with a 6 position control key and LED indicators.
  • Page 5 programmable keyboard, the user should notice that at the bottom of each key top, one of the four walls is springy and in the hole on the keyboard to accept the bottom of the key top there is a protuberance at the lower side. The user should match the springy wall of key top against the protuberance in the hole (ref.
  • Page 6: Keyboard Construction

    APPLICATION KEYBOARD CONSTRUCTION MSR indicator (for KB-6600 only) Power-on LED 6 position key 6 position key switch 15 x 6 push keys MSR slot Fig. 4-1 This keyboard is constructed of three parts on the top surface (ref. Fig. 4-1). A 6 position turning key switch area is at the upper right corner, a 15 x 6 matrix of push key switches occupies most of the top surface and a slot near the right edge is designed for the Magnetic Stripe Reader of the -M2, -M3, -MJ models.
  • Page 7 PRG REG Fig. 4-2 MSR (Magnetic Stripe Reader) The MSR or USB MSR slot is near the right edge of the Programmable Keyboard. The MSR indicator LED (available in KB-6600 only) is located at the upper left corner of the block containing the electronic key. There are three choices of the reader types –...
  • Page 8: Programming The Keyboard

    After completion of the “Setup”, there will be a program group “Posiflex Tools” in the program files. Clicking the program “Posiflex Programmable Keyboard” in this group will activate the KBW.EXE for the KB-6600 series. Please select the right model when entering the program.
  • Page 9 PROGRAMMING UTILITY SETUP PC or POS SYSTEM PC or POS SYSTEM PS/2 KB PORT USB PORT KB-6600 USB or PS2 KEYBOARD KB-6600U PC or PS2 KEYBOARD KB-6600 KB-6600U Fig. 5 - 1 Preparations HARDWARE LIMITATION In case of “multiple combination key” application which means pressing three or more keys at the same time to obtain certain data output from the keyboard, there could be some limitations inherent from the nature of keyboard structure.
  • Page 10 QUICK GUIDE on KBM.EXE for KB-6600 UNDER DOS Please refer to our web site for every detail in programming these programmable keyboards. The following simplified guide severs as a concise tool for instant application. Keys To Program How to Program Them Esc, F1 - F12, Back Space, Shift, Ctrl, Alt, Insert, Delete, End, Page Press: (Alt-N), Esc, “Desired Key”,...
  • Page 11 In other words, transferring a file generated from other programmable keyboard to KB-6600 series could mess up the data format inside KB-6600 series, and vice versa.
  • Page 12: Specifications

    SPECIFICATIONS CONSTRUCTION: Spill-proof, 84 keys + 6 position control LED COLOR: Power on – Green MSR – Green & Red (for KB-6600 only) KEY SWITCH TYPE: membrane plus rubber dome KEY STROKE TRAVEL: 3.2 mm KEY TOP SIZE: 19 x 19 mm for normal keys PREPRINTED KEYS: “.”, “00”, “0”...
  • Page 13: Output Interface

    OUTPUT INTERFACE: PS2 Interface connection (KB-6600): 6 pin DIN female connector: connect to host computer 6 pin mini DIN female connector: connect to input PS2 keyboard Connects to PS2 Connects to PC through keyboard PS2 Cable: 21863152800 USB Interface connection (KB-6600U): “B”...
  • Page 14: Power Consumption

    Card data format Card standard IATA ABA THRIFT JIS I JIS II Track used Track 1 Track 2 Track 3 Track 2 Rear side Recording method F2 M F2 M F2 M F2 M Recording density 210 BPI 75 BPI 210 BPI 75 BPI 210 BPI Recording capacity 79 / 7 40 / 5...

This manual is also suitable for:

Kb-6600u series

Table of Contents