Sharp AR-C260P Setup Manual page 2

In some areas, the "POWER" switch positions are marked "I" and "
instead of "ON" and "OFF".
The symbol " " denotes the copier is not completely de-energized but in a stand-by
condition at this "POWER" switch position.
If your copier is so marked, please read "I" for "ON" and "
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
The CE mark logo label is affixed on an equipment in case that the directives described in the above
sentence are applicable to the product. (This sentence is not applicable in any country where the above
directives are not required.)
Shielded Network cable, USB cable and Centronics cable must be used with this equipment to
maintain compliance with standards.
The display screens, messages, and key names shown in the manual may differ from those on the
actual machine due to product improvements and modifications.
" on the copier
" for "OFF".