Introduction - Patton electronics NetLink 1001MC Operation Manual

Model 1001MC Operations Guide

Introduction

The Model 1001MC NetLink™ SNMP Management Card (see
configure and monitor multiple Patton NetLink cards racks and their connected standalone units.
The management card has the following features:
• Connects to the SNMP workstation via a 10Base-T Ethernet (RJ-45) connection
• Uses a standard web browser (Internet Explorer or Netscape Navigator, for example) to configure the
HTTP/HTML management screens.
• Supports generic network management software and MIB walking tools
• Functions as an SNMP proxy agent for Patton NetLink rack cards and their remote standalone units
• FLASH upgradeable through FTP connection
• User selectable traps on a per-card basis
• Compatible with the following rack cards:
- Model 1092ARC KiloModem™ 2 or 4-wire Baseband Modem with 2B1Q Encoding
- Model 1094ARC NetLink 1.152-Mbps HDSL Modem
- Model 1095RC NetLink 2-wire, 2-Mbps mDSL Modem
- Model 2701RC G.703/G.704 Network Termination Unit (NTU)
- Model 2707RC G.703 NTU
- Model 2710RC T1/FT1 CSU/DSU
- Model 2715RC G.703/G.704 NTU
Introduction
Figure 1. Model 1001MC NetLink Management Card
figure 1) enables an SNMP workstation to
1 • Introduction
11