Panasonic EASA-PHONE KX-T123211D Installation Manual page 129

i" " " " " " " " " ' ...- until the desired jack number (01 through 32) appears
.........................
Dial
(Othrough
9,
3c
ore)
:. ................................... until the desired letter appears
; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
= mk[ : jack number 01
AB
[-El: jack number 32
Description
Each extension can be programmed by name and
will be displayed on the display when making or
receiving intercom calls.
Programming
1.
. 2.
3.
4.
5.
Dial (63).
" Extension Name" will be displayed.
Press the NEXT button.
" Jack NO ? +" will be displayed.
Press the NEXT button or dial jack number
(01 through 32).
" SO1 : " will be displayed.
x
jack number
To program the-extension name,
0 Dial (0 through 9, * or #)
@ Press the SELECT button until the desired
letter appears.
@ Repeat steps @ and 0, to program the
desired name.
Press the MEMORY button.
The LCD will stop blinking.
6.
l
To advance to the next jack number,
press the NEXT button.
l
To return to the previous jack number,
press the PREV button.
l
To go to the desired jack number,
press the SELECT button and then dial the
jack number.
3-69
?
'
0
\
Dial
Display
Press the SELECT button
*
"
+ - =
< >
#
$
%&@()
7. Repeat steps 4 to 6, to program the other
extension names of jack numbers.
8. To return to the initial program mode, press the
END button.