Registering The Camera; Creating New Camera - Panasonic HNP11 Operating Instructions Manual

Operating Instructions
2.4

Registering the Camera

Before you can view or record images, each camera must be configured on this
software.
• If you change the destination folder from the default folder of this software,
select a folder to save images in advance (see page 25).
• The camera information can be imported and exported (see page 74).
2.4.1

Creating New Camera

1.
Select [Camera]
• You can create a camera on the menu displayed by right-clicking on the
camera list (see page 68).
• The create new camera page is displayed.
Page Selection Tab
Basic Settings
Image Settings
Recording Capacity
Limit
Motion Detection
Keyword
2.
Set the parameters and click [OK].
• The camera preview is displayed on the camera list.
32
[Create New Camera] on the menu bar.
: Displays the setup page for the camera name and IP
address (see page 33).
: Displays the setup page for the image size and recording
method (see page 35).
: Displays the setup page for the recording capacity limit
value (see page 36).
: Displays the setup page for the motion detection
recording (see page 37).
: Displays the setup page for recorded image keyword
(see page 39).