Feature Button Descriptions - Panasonic KX-T7400 Series User Manual Addendum

Feature Button Descriptions

KX-T7431/KX-T7433/KX-T7436/KX-T7420/KX-T7425
AUTO ANSWER/MUTE button
Used for intercom auto answer; or it turns
the microphone off during a conversation.
AUTO DIAL/STORE button
Used for speed dialling or storing
program changes.
CONFERENCE button
Used to establish a three-party conference.
FLASH/RCL button
This button can be used to send a Recall
signal to the local exchange or disconnect
the current call and start another call.
Flexible Outside (CO) Line buttons
Used to make or receive an outside call,
or access a feature if the button is
assigned (e.g. One touch dialling button).
Function buttons (F1 through F10)
(KX-T7436 only)
Used to perform the corresponding
displayed function or operation.
FWD/DND (Call Forwarding/Do Not Disturb)
button
Used to perform a Call Forwarding
feature or set the Do Not Disturb (DND)
feature.
HOLD button
Used to place a call on hold.
INTERCOM button
Used to make or receive extension calls.
Jog Dial
Used to adjust the volume of the handset
receiver, headset, ringer and speaker, or to
adjust the display contrast. Refer to
"Initial Setting" in this manual. It is also
used to select data from the Call Directory
and the System Feature Access Menu for
KX-T7431, KX-T7433, KX-T7436.
MESSAGE button
Used to leave a notification to a busy
extension or call back the message
notification sender.
Configuration
MODE button (KX-T7431 only)
Used to change the display in order to
access various features.
PAUSE button
Used to insert a pause in speed dial
numbers or in other one-touch dial
numbers.
PROGRAM button
Used to enter and exit the programming
mode.
REDIAL button
Used for the redialling the last number or
redialling automatically.
SELECT button (KX-T7431 only)
Used to select a displayed feature or to
call a displayed phone number.
SHIFT button
Used to alternate the selection of Soft
Button functions.
Soft buttons (S1 through S3)
Used to perform the function or operation
that appears on the bottom line of the
display.
SP-PHONE (Speakerphone) button
Used for a handsfree speakerphone
operation.
TRANSFER button
Used to transfer a call to another
extension or external destination.
VOICE CALL/MUTE button
(KX-T7420 only)
Used for intercom auto answer, but it
cannot be used for handsfree
conversations. It also turns the
microphone off during a conversation.
9