Panasonic KX-T336 Installation Instructions Manual page 263

DATA ERROR No.
030
031
042
043
045
046
047
049
Technical Manuals Online! - http://www.tech-man.com
Probable Cause
A checksum error has been detected.
I
improper data is received.
I
I
Execution is impossible during off-line.
Some required items are omitted.
The number of equipment you attempt to
assign is over the limit.
Slot number you specified is not valid. (DTM,
LBT, DSP commands)
Card type you specified is not valid. (DlM
LBT, DSP commands)
The status of the card you specified is not
vaiid. (DTM. LBT, DSP commands)
No DTMF Generator/Receiver is installed on
the card you specified. (DTM, LBT
commands)
You specified the DTMF Generator/Receiver
of diierent cards.(DTM. LBT commands)
I
Communication line is defective, or backup
data is destroyed.
Communication link is defective, or backup
data is destroyed.
I
Execute during on-line.
Impossible.
Enter the required items.
Assign the equipment within the limit of
number.
Specify the slot in which T-l/E-l card is
installed.
Specify the T-l/E-l card.
Change the status to valid one.
Install the optional DTMF Generator/Receiver
card.
Specify the DTMF Generator/Receiver of the
same card.
lo-o-7
(70695)
Countermeasure
. I
I
I
I