Flexible Day Ringing Assignment - Panasonic EASA-PHONE KX-T61610 Installation Manual

O--------utltiI the desired extension number appears
,---.-.-." 'dial the CO number
. . . . . . . . . . . default (all 16 extensions)
[09] [NEXT] [NEXT] [C..'.E] [MEMORY][END]
or
f
[09] [NEXTI [ABI [C...E] [MEMORY][END]
~.~-~.~~~.~~~~~~~---~-~~~ AB=[%]: to assign the same on all 16 extensions
Description
Conditions
Through programming, you can select which
extensions will ring on incoming calls from rhe
Central Ofice during the day time.
Programming
1. Dial (09).
"DAY: IN CO" will be displayed.
2. Press the NEXT button.
"ENTER EXT NO" will be displayed.
3. Press the NEXT button.
"11: CO 1 2 3 4 5 6" will be displayed and "1
2 3 4 5 6" will blink,
4. Dial the CO numbers to be entered.
The desired combination of CO lines will be
displayed.
I
To prohibit ringing, press the CLEAR but-
ton insread of the CO number.
"11: CO....." will be displayed.
5. Press the MEMORY button.
The LCD will sfop blinking.
6. Repeat steps 3 to 5, to program the assign-
ment on the orher extensions.
7. To return to the initial program mode, press
the END button.
0 When you start
the
programming from srep I,
you may dial the desired extension number
instead of the NEXT button at step 3.
eThe PREV button allows. you to go to the
previous extension for displuying the CO
assignment.
Exatnple:
Incoming calls from Central Ofice during the
day are programmed to ritq at extension
il
only.
1. [09] [NEXT] [++I [CLEAR] [MEMORY]
2.
WEW[ll PI
[31 [41 El PI
[MEMORY] [END]
Programming Table
See page 6-15.
3-17