Certificates; Declaration Of Conformity - Viessmann Vitosol-T Service Instructions Manual

Certificates

Declaration of conformity

We, Viessmann Werke GmbH&Co KG, D-35107 Allendorf, declare as sole respon-
sible body, that the products
Vitosol 200-T and 300-T
conform to the following standards:
DIN 1055
EN 12975 to solar KEYMARK
In accordance with the following directives, these products are designated _:
2006/95/EC
89/336/EEC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure equipment
■ Class I according to appendix II, diagram 5
■ Module A according to appendix III
■ Identification of individual devices with a content of less than 2 litres as an assembly
according to article 3 (2), subject to the installation of at least one pair
The pressure device was tested without fitted equipment (safety assembly).
The pressure device must be equipped in accordance with current national regula-
tions prior to installation and commissioning.
The product characteristics determined as system values for the Vitosol prod-
uct as part of EC type testing according to the Efficiency Directive (see speci-
fication table) can be used for the energy assessment of heating and ventilation
equipment to DIN V 4701-10.
Allendorf, 1 March 2010
20
Viessmann Werke GmbH&Co KG
pp. Manfred Sommer