Troubleshooting Ethernet PCI Adapters
•
"Checking Status LEDs" on page 2-36
•
"Checking Cables of Ethernet PCI Adapters" on page 2-38
•
"Verifying Link Data Rate and Mode" on page 2-38
•
"Checking the Network Statistics" on page 2-38
•
"Using PROSet Utility Diagnostics" on page 2-41
Checking Status LEDs
Examine the status LED for each PCI slot of the system to verify that the slots are
functioning normally. For more information about interpreting PCI slot status LEDs, see
the operation and maintenance guide for your system, as listed in
If the PCI slots are functioning normally, examine the status LEDs on the individual
Ethernet PCI adapters.
The rear of each CPU- I ⁄ O enclosure has two connector ports for the embedded
10/100/1000 Ethernet PCI adapter. Each connector port has two status LEDs, shown
in
Figure
2-23.
LEDs on the systems.
Figure 2-23. Status LEDs on Embedded Ethernet Ports
1
ACT/LINK (Green) LED of the embedded 10/100/1000-Mbps Ethernet port
2
10/100/1000 (Green/Amber) LED of the embedded 10/100/1000-Mbps
Ethernet port
2-36
Express5800/320Ma: PCI Adapter Guide
Table 2-10
describes the meaning of the embedded Ethernet port status
1
Table
2
1-2.
asys029