Power and Power-Up Modes
Battery indicator
Check the Battery indicator to determine the status of the battery pack.
The following indicator lights indicate the battery status:
Flashing orange
Orange
Green
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the Battery indicator will go out. When the battery pack's
temperature falls to a normal range, charge will resume. This occurs
whether the computer's power is on or off.
DC IN indicator
Check the DC IN indicator to determine the power status with the AC
adaptor connected:
Green
Flashing orange
No light
Power indicator
Check the Power indicator to determine the power status:
Green
Flashing orange
No light
6-4
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Indicates the AC adaptor is connected and
charging the battery.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Indicates the AC adaptor is connected and
supplying proper power to the computer.
Indicates a problem with the power supply. Plug
the AC adaptor into another power outlet. If it still
does not operate properly, contact your dealer.
Under any other conditions, the indicator does not
light.
Indicates power is being supplied to the computer
and the computer is turned on.
Indicates power is being supplied to the computer
while the computer is in Standby Mode. The
indicator turns on for one second and off for two
seconds.
Under any other conditions, the indicator does not
light.
User's Manual
Need help?
Do you have a question about the TECRA M5 and is the answer not in the manual?
Questions and answers