Updating The Firmware (Mac Os X) - TerraTec PHASE X24 fw Manual

Updating the firmware (Mac OS X)

■ Run the program "FWUpdater_vX.X.app". It can be found on the driver CD in the
"Firmware" folder and can be downloaded from the Internet. Click "Close" to acknowl-
edge the following security warning.
■ Click "Open" and specify the firmware file you would like to load. The file will have the
ending "bcd" and can be found in the Firmware folder.
■ Next, click "Upgrade Firmware" to start the update process. You must have local
administrator rights to update the firmware.
■ The PHASE X24 FW must be restarted after the firmware update completes success-
fully. Either disconnect the PHASE X24 FW from the computer and reconnect it, or
restart the computer.
PHASE X24 (English)
The PHASE X24 FW as the default device in OS X
17