USER MANUAL
Electric Chain Saw
WARNING • PLEASE READ
Beware of kickback. Hold chain saw firmly with both hands when using. For your own safe-
ty, please read and follow the safety precautions in this manual before attempting to oper-
ate your chain saw. Improper use can cause serious injury.
MODEL NO. AC211114/AC211114A/AC21111N4/AC211116/AC211116A
6096-2111xx
DOUBLE INSULATED
WARRANTY INFORMATION
CHAIN SAW WARRANTY
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the "Company") to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and subject
to the conditions stated herein, repair or replace without charge this product or any component part, which
upon examination by an Authorised Service Agent or by the Company is found to be defective.
Warranty conditions
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty Card.
The period of the warranty begins from the original date of purchase, notwithstanding any subsequent
repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Comapany's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Company or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to prevent
damage.
Warranty exclusions
Normal wear parts or components are subject to seperate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not covered
by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal
wear parts include, but are not limited to:
Chains.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
Chain Bar.
Lubricants.
1
AU
Need help?
Do you have a question about the AC211114 and is the answer not in the manual?
Questions and answers
talon chainsaw call back
still waiting for a call back
Chainsaw just stopped while cutting
The Talon AC211114 chainsaw may have stopped while cutting due to the activation of the chain brake/hand guard, which stops the chain in milliseconds. Additionally, issues such as a defective switch, improper chain tension, or adverse weather conditions could also cause the chainsaw to stop.
This answer is automatically generated
replacement chain oiler for talon blackhawk 14