Related Manuals for SPT Mr. Induction SR-964T
Summary of Contents for SPT Mr. Induction SR-964T
- Page 1 Micro-Computer Induction Cooktop SR-964T INSTRUCTION MANUAL Thank you for your purchase. Please read thoroughly before initial use and keep in a safe place for future reference.
-
Page 2: Table Of Contents
Do not operate any appliance with a damaged cord or plug; or after Cord length the appliance malfunctions or has been damaged in any way. Return appliance to the Sunpentown for examination, repair or adjustment. The use of accessory attachments not recommended by the manufacturer may cause injuries. -
Page 3: Structure Description & Function
STRUCTURE DESCRIPTION & FUNCTION OPERATION COOK Mode: Heat is constantly added at the selected power level. 7 COOK levels (wattage): 100, 300, 500, 700, 900, 1100, 1300. TEMP Mode: Unit will maintain at selected temperature. 13 TEMP settings (° F/° C): 100/40, 120/50, 140/60, 160/70, 180/80, 190/90, 210/100, 230/110, 250/120, 280/140, 300/160, 350/180, 390/200 Temperature may vary slightly at different sections of the pot. -
Page 4: Lock Button
KEY POINTS LOCK BUTTON 1. Press LOCK button to lock in settings. If no cookware is placed or sensed on the unit, cooker will When locked, display will jump between time left and setting. automatically shut off after 10 seconds. No changes can be made (mode, level or time). -
Page 5: Troubleshooting
Note: Retry after several minutes, if Make sure enough clearance is around the unit. error remains, contact Sunpentown Unit was set on cook mode and idle for 2 Temperature probe is abnormal, Display “E4” without heating hours. - Page 6 The warranty after repair will not be extended beyond the original one-year period. All replacement parts will be new or reconditioned. Parts, which are replaced, become the property of Sunpentown. The warranty applies for the use of the product in the USA only. What is NOT COVERED: Warranty does not include freight charges.
Need help?
Do you have a question about the Mr. Induction SR-964T and is the answer not in the manual?
Questions and answers